Astable Multivibrator

ysaip07·KiCAD_Project·Astable Multivibrator/Astable_Multivibrator.kicad_pcb

Astable Multivibrator PCB layout, top view — open source board by ysaip07

About the Astable Multivibrator PCB

Astable Multivibrator is an open source PCB design by ysaip07, published on GitHub. It is a 2-layer board measuring 11.3 × 11.8 mm, with 5 components from 5 distinct parts.

Other key parts include the NE555DR. By type, the board carries 2 capacitors, 2 resistors and 1 IC.

From the project

Personal PCB design projects using KiCad, reflecting a strong foundation in electronics design, component footprints, and PCB fabrication workflows.

A PCB design for an Astable Multivibrator circuit built using KiCad. This project demonstrates core analog electronics principles — the circuit generates a continuous square wave output without any external triggering, making it ideal for clock generation, LED blinking, and tone generation applications. Circuit Description An Astable Multivibrator is a free-running oscillator built using two transistors (or a 555 timer) in a cross-coupled feedback configuration. The output continuously switches between HIGH and LOW states at a frequency determined by the RC time constants.

Main components on the Astable Multivibrator

Astable Multivibrator bill of materials (BOM)

5 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NE555DR
IC1
1
0.1UF
0.1uF
C1
1
10NF
10nF
C2
1
RK73H2ATTE1002F
10k
R1
1
RK73H2ATTE1003F
100k
R2

Astable Multivibrator design files

The KiCad project lives in the ysaip07/KiCAD_Project repository on GitHub; these links point at the commit this page was built from.

Astable Multivibrator: common questions

How big is the Astable Multivibrator PCB?

The Astable Multivibrator measures 11.3 × 11.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Astable Multivibrator?

5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Astable Multivibrator design files?

From the ysaip07/KiCAD_Project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Astable Multivibrator design in my own project?

The repository has no license, so all rights stay with ysaip07. Use it as a reference, and ask the author before reusing the design.

More boards in KiCAD_Project