ESP32-S3
ysaip07·KiCAD_Project·ESP32-S3/ESP32-S3.kicad_pcb
About the ESP32-S3 PCB
ESP32-S3 is an open source ESP32 PCB design by ysaip07, published on GitHub. It is a 4-layer board measuring 50 × 50 mm, with 41 components from 30 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the USBLC6-2SC6, LM1117-3.3 and Si7021-A20. By type, the board carries 14 resistors, 8 capacitors, 5 diodes, 4 ICs, 4 connectors and 3 switches.
It belongs with the iot & wireless, sensors and dev boards & breakouts designs in this gallery.
From the project
Personal PCB design projects using KiCad, reflecting a strong foundation in electronics design, component footprints, and PCB fabrication workflows.
What is the ESP32-S3? The ESP32-S3 is a powerful System-on-Chip (SoC) made by Espressif Systems. It's the brain of your entire board — a microcontroller with built-in Wi-Fi and Bluetooth.
Key Features (from your schematic — U2: ESP32-S3-WROOM-1) 🧠 Processing Power - Dual-core Xtensa LX7 processor running at up to 240 MHz - Much faster than a regular Arduino (16 MHz) - Can run two tasks simultaneously on two cores
Main components on the ESP32-S3
ESP32-S3 bill of materials (BOM)
41 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U2 |
| 1 | LM1117-3.3 | SOT-223-5 | U3 |
| 1 | Si7021-A20 | DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | U4 |
| 1 | USB_C_Receptacle | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | LL1009-2A, 2.54MM 2*3PIN HEADER,LENGTH=20MM Conn_02x03 Cixi Langlin | PinHeader_02x03_P2.54mm_Vertical_SMD | J2 |
| 1 | Pin_02x05 | PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04 | Conn_JST_SH_01x04_Horizontal_SMD | J4 |
| 1 | Polyfuse_1A | Fuse_1206_3216Metric | F1 |
| 1 | RESET | SW_SPST_B3U-1000P | SW1 |
| 1 | BOOT | SW_SPST_B3U-1000P | SW2 |
| 1 | USER_SW | SW_Tactile_SPST_Angled_PTS645Vx31-2LFS | SW3 |
| 1 | LED_Generic_RGB_ARGB | LED_Cree-PLCC4_3.2x2.8mm_CCW | LED1 |
| 1 | 1N5817 | D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 3 | ESD9B3.3ST5G | D_SOD-923 | D2, D3, D5 |
| 1 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D4 |
| 1 | BLM21PG220 | L_0805_2012Metric | FB1 |
| 1 | 0.1UF 10uF | C_0603_1608Metric | C1 |
| 1 | 10NF 100nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 2 | 100nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C8 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1uF | C_0603_1608Metric | C4, C7 |
| 2 | 22uF | C_0805_2012Metric | C5, C6 |
| 1 | 10K 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | 100K 5.1k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 2 | 22ohms | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R6 |
| 2 | 5.1k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R7 |
| 2 | 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5, R9 |
| 1 | 100k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8 |
| 3 | 1k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10, R11, R12 |
| 2 | 2K2 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R13, R14 |
ESP32-S3 design files
The KiCad project lives in the ysaip07/KiCAD_Project repository on GitHub; these links point at the commit this page was built from.
ESP32-S3: common questions
What microcontroller does the ESP32-S3 use?
The ESP32-S3 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the ESP32-S3 PCB?
The ESP32-S3 measures 50 × 50 mm, has 4 copper layers and is 1.582 mm thick.
How many components are on the ESP32-S3?
41 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-S3 design files?
From the ysaip07/KiCAD_Project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32-S3 design in my own project?
The repository has no license, so all rights stay with ysaip07. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32-S3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in KiCAD_Project
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k