HardLabs

Pi1551-III Faceplate (FB2)

ytmytm·Pi1551-III·faceplates/Pi1551-III Module FB2/Pi1551-III Module FB2.kicad_pcb

Pi1551-III Faceplate (FB2) PCB layout, top view — open source board by ytmytm

About the Pi1551-III Faceplate (FB2) PCB

Pi1551-III Faceplate (FB2) is an open source PCB design by ytmytm, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 100 × 100 mm, with 4 components from 1 distinct parts.

It belongs with the retro computing designs in this gallery.

From the project

Pi1551 in a Pi1541-III-style case: 1551 + TAP for Plus/4/C16, no 3D printing

A 1551 floppy emulator for Commodore C16, C116 and Plus/4, in the same mechanical and aesthetic package as the C64 Pi1541-III: Raspberry Pi 3–based, 1.3" OLED, rotary encoder, and stack of PCBs with faceplates.

This variant uses the Pi1551 firmware and connects to the computer via tcbm2sd (TCBM bus). It also adds a MiniDIN-7 port for TAP tape playback with a simple 1:1 male-to-male cable to the machine’s tape port.

Pi1551-III Faceplate (FB2), from the project README
From the project README

Pi1551-III Faceplate (FB2) bill of materials (BOM)

4 components, 1 distinct parts.

QtyPartRefs
4
Mounting
M1, M2, M3, M4

Pi1551-III Faceplate (FB2) design files

The KiCad project lives in the ytmytm/Pi1551-III repository on GitHub; these links point at the commit this page was built from.

Pi1551-III Faceplate (FB2): common questions

How big is the Pi1551-III Faceplate (FB2) PCB?

The Pi1551-III Faceplate (FB2) measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pi1551-III Faceplate (FB2)?

4 components, from 1 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pi1551-III Faceplate (FB2) design files?

From the ytmytm/Pi1551-III repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pi1551-III Faceplate (FB2) design in my own project?

Yes, under the terms of its CERN-OHL-1.2 license, which ytmytm chose for the repository.

More boards in Pi1551-III

Similar boards