RP2040CommandStation - コピー
About the RP2040CommandStation - コピー PCB
RP2040CommandStation - コピー is an open source RP2040/RP2350 PCB design by ytsurui, published on GitHub under the MIT license. It is a 2-layer board measuring 95 × 78 mm, with 68 components from 36 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q16JVSN, TB6643KQ, TC75S103F, M78AR033 and XBEE. By type, the board carries 19 capacitors, 18 resistors, 7 connectors, 7 diodes, 6 ICs and 3 transistors.
Main components on the RP2040CommandStation - コピー
RP2040CommandStation - コピー bill of materials (BOM)
68 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | RP2040-QFN-56 | U1 |
| 1 | W25Q16JVSN | SO-8 | U2 |
| 1 | TB6643KQ | HSIP7-P-2.54A | U3 |
| 1 | TC75S103F | SOT-23-5 | U4 |
| 1 | M78AR033 | M78AR0XX | U5 |
| 1 | XBEE | XBee | U6 |
| 3 | SSM3K7002BFU | SC-70 | Q1, Q2, Q3 |
| 1 | 12MHz | FA-238_Crystal | Y1 |
| 1 | ConnModule | CommModuleTiny | CN1 |
| 1 | DC_Jack | BARREL_JACK | J1 |
| 1 | RAIL_POWER | TB111-2 | J2 |
| 1 | USB_B | USB_B | J3 |
| 1 | External_Conn_1 | PinSocket_2x14_2_54mm | J4 |
| 1 | External_Conn_2 | PinSocket_2x14_2_54mm | J5 |
| 1 | Debug | PinHeader_01x03 | J6 |
| 4 | Hole 3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 1 | BOOT_SW | TS-0606 | SW1 |
| 1 | POWER | TS-0606 | SW2 |
| 1 | RESET | TS-0606 | SW3 |
| 1 | SR54F | SMBF | D1 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 1N4148W | SOD-123FL | D2, D3, D4 |
| 3 | LED | LED_3mm | D5, D6, D7 |
| 1 | 1000uF | CAP_TH_12_5 | C1 |
| 12 | 104 | C_1005 | C2, C5, C8, C9, C12, C13, C14, C15 +4 |
| 1 | 470uF | CAP_TH_8x11_5 | C3 |
| 1 | 100uF | CAP_TH_5x11 | C4 |
| 2 | 10p | C_1005 | C6, C7 |
| 2 | 105 | C_1005 | C10, C11 |
| 1 | R010 | R_6432 | R1 |
| 4 | 102 | R_1608 | R2, R3, R8, R9 |
| 5 | 103 | R_1608 | R4, R5, R13, R14, R17 |
| 1 | 473 | R_1608 | R6 |
| 1 | 472 | R_1608 | R7 |
| 1 | NMT | R_1608 | R10 |
| 2 | 270 | R_1608 | R11, R12 |
| 3 | 331 | R_1608 | R15, R16, R18 |
RP2040CommandStation - コピー design files
The KiCad project lives in the ytsurui/RP2040CommandStation repository on GitHub; these links point at the commit this page was built from.
RP2040CommandStation - コピー: common questions
What microcontroller does the RP2040CommandStation - コピー use?
The RP2040CommandStation - コピー is built around the RP2040, from the RP2040/RP2350 family.
How big is the RP2040CommandStation - コピー PCB?
The RP2040CommandStation - コピー measures 95 × 78 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RP2040CommandStation - コピー?
68 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the RP2040CommandStation - コピー design files?
From the ytsurui/RP2040CommandStation repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the RP2040CommandStation - コピー design in my own project?
Yes, under the terms of its MIT license, which ytsurui chose for the repository.
Can I test firmware for the RP2040CommandStation - コピー without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in RP2040CommandStation
Similar boards
RP2040/RP2350Open Book Abridged Edition
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1k
RP2040/RP2350Corne
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350Corne
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0k
RP2040/RP2350Jitx design
55.5 × 65 mm26 parts4LGPL-3.05.0k
RP2040/RP2350Pro V2
kata0510
290.1 × 130 mm270 parts2LMIT2.3k