AnsicGLP3'0
yuburoll·ANSIC·kicad/GLP3'0/ansicGLP3'0.kicad_pcb
About the AnsicGLP3'0 PCB
AnsicGLP3'0 is an open source PCB design by yuburoll, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 97 mm, with 48 components from 7 distinct parts.
Other key parts include the ProMicro_r. By type, the board carries 23 switches, 21 diodes, 3 connectors and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
uniform row staggered 40~42 key split keyboard under 100x100mm PCB
uniform row staggered 40~42 key split keyboard under 100x100mm PCB
- 2x ansic PCB Boards (5 boards are 2$ on JLC w/o shipping cost)
- 1x printed case sets, 2 parts total (Approx. 6$ if you buy printed one on JLC. Use braced ones or 2mm ones for 3d print)
- 2x keyboard plates (Approx. 4~12$ which method you use: 3DP, FR4 fab, CNC, laser cut. etc...)
- 2x back plates (Approx. 6~18$ which method you use: 3DP, FR4 fab, CNC, laser cut. etc..)

Main components on the AnsicGLP3'0
AnsicGLP3'0 bill of materials (BOM)
48 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro_r | ProMicro_unrouted_flipped_FootprintPropertyFix | U1 |
| 2 | AudioJack4 | TRRS-PJ-320A_PIN | J1, J2 |
| 1 | Conn_01x02_Socket | Molex_PicoBlade_53048-0210_1x02_P1.25mm_Horizontal | J3 |
| 21 | SW_Push | MXGLP3'0_Hotswap_FootprintPropertyFix_Guided | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +13 |
| 1 | SW_SPDT | SW_SPDT_Shouhan_MSK12C02 | SW22 |
| 1 | SW_Push | SW_SPST_TL3342 | SW23 |
| 21 | D | Diode_TH_SMD_REVERSIBLE | D1, D2, D3, D4, D5, D6, D7, D8 +13 |
AnsicGLP3'0 design files
The KiCad project lives in the yuburoll/ANSIC repository on GitHub; these links point at the commit this page was built from.
AnsicGLP3'0: common questions
How big is the AnsicGLP3'0 PCB?
The AnsicGLP3'0 measures 100 × 97 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AnsicGLP3'0?
48 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the AnsicGLP3'0 design files?
From the yuburoll/ANSIC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the AnsicGLP3'0 design in my own project?
Yes, under the terms of its MIT license, which yuburoll chose for the repository.