AnsicSolder
About the AnsicSolder PCB
AnsicSolder is an open source PCB design by yuburoll, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 97 mm, with 48 components from 7 distinct parts.
Other key parts include the ProMicro_r. By type, the board carries 23 switches, 21 diodes, 3 connectors and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
uniform row staggered 40~42 key split keyboard under 100x100mm PCB
uniform row staggered 40~42 key split keyboard under 100x100mm PCB
- 2x ansic PCB Boards (5 boards are 2$ on JLC w/o shipping cost)
- 1x printed case sets, 2 parts total (Approx. 6$ if you buy printed one on JLC. Use braced ones or 2mm ones for 3d print)
- 2x keyboard plates (Approx. 4~12$ which method you use: 3DP, FR4 fab, CNC, laser cut. etc...)
- 2x back plates (Approx. 6~18$ which method you use: 3DP, FR4 fab, CNC, laser cut. etc..)
Main components on the AnsicSolder
AnsicSolder bill of materials (BOM)
48 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro_r | ProMicro_unrouted_flipped_FootprintPropertyFix | U1 |
| 2 | AudioJack4 | TRRS-PJ-320A_PIN | J1, J2 |
| 1 | Conn_01x02_Socket | Molex_PicoBlade_53048-0210_1x02_P1.25mm_Horizontal | J3 |
| 21 | SW_Push | MX_Mill-Max_FootprintPropertyFix | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +13 |
| 1 | SW_SPDT | SW_SPDT_Shouhan_MSK12C02 | SW22 |
| 1 | SW_Push | SW_SPST_TL3342 | SW23 |
| 21 | D | Diode_TH_SMD_REVERSIBLE | D1, D2, D3, D4, D5, D6, D7, D8 +13 |
AnsicSolder design files
The KiCad project lives in the yuburoll/ANSIC repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/ansicSolder.kicad_pcb
- Schematickicad/ansicSolder.kicad_sch
AnsicSolder: common questions
How big is the AnsicSolder PCB?
The AnsicSolder measures 100 × 97 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AnsicSolder?
48 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the AnsicSolder design files?
From the yuburoll/ANSIC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the AnsicSolder design in my own project?
Yes, under the terms of its MIT license, which yuburoll chose for the repository.
More boards in ANSIC
Similar boards
Lily58 Lite Rev3 TOP Case
kata0510
142.5 × 106.4 mm34 parts2LMIT2.3k
Lily58 Pro BOTTOM
142.5 × 106.3 mm5 parts2LMIT2.3k
Lily58
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58 Pro
142.5 × 106.3 mm83 parts2LMIT2.3k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
Pcb top
tompi
132.5 × 95.1 mm18 parts2LCC-BY-4.01.2k