Zizhuo hackpad
yuheng28·zizhuo-hackpad·pcb/final macropad.kicad_pcb
About the Zizhuo hackpad PCB
Zizhuo hackpad is an open source AVR/Arduino PCB design by yuheng28, published on GitHub. It is a 2-layer board measuring 64.7 × 63.5 mm, with 16 components from 5 distinct parts.
Its main chip is the Sparkfun_Pro_Micro, from the AVR/Arduino family. By type, the board carries 8 resistors, 6 switches, 1 IC and 1 connector.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
ZizhuoPad is a custom mechanical macropad with 6 keys and an OLED display.
ZizhuoPad is a custom mechanical macropad with 6 keys and an OLED display.
It is designed to allow for easy hotswapping of the switches, and (maybe not as easy) key mapping modifications.
This is a project to build a custom mechanical macropad. The purpose of this project is to create a birthday gift for my friend, after whom this project is named.
As a technical challenge, I opted to write the firmware using AVR-C, instead of using Arduino or QMK. The PCB was designed using KiCAD, and the case was designed using Fusion 360.
Main components on the Zizhuo hackpad
Zizhuo hackpad bill of materials (BOM)
16 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Sparkfun_Pro_Micro | Sparkfun_Pro_Micro | U1 |
| 1 | OLED Module | PinSocket_1x04_P2.54mm_Vertical | J1 |
| 6 | SW_Push | MXOnly-1U-Hotswap | SW1, SW2, SW3, SW4, SW5, SW6 |
| 6 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8 |
Zizhuo hackpad design files
The KiCad project lives in the yuheng28/zizhuo-hackpad repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/final macropad.kicad_pcb
- Schematicpcb/final macropad.kicad_sch
- BOMbom.csv
Zizhuo hackpad: common questions
What microcontroller does the Zizhuo hackpad use?
The Zizhuo hackpad is built around the Sparkfun_Pro_Micro, from the AVR/Arduino family.
How big is the Zizhuo hackpad PCB?
The Zizhuo hackpad measures 64.7 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Zizhuo hackpad?
16 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Zizhuo hackpad design files?
From the yuheng28/zizhuo-hackpad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Zizhuo hackpad design in my own project?
The repository has no license, so all rights stay with yuheng28. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Zizhuo hackpad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k