Motokey

yuluis·motokey·hardware/motokey-lockbox.kicad_pcb

Motokey PCB layout, top view — open source AVR/Arduino board by yuluis

About the Motokey PCB

Motokey is an open source AVR/Arduino PCB design by yuluis, published on GitHub. It is a 2-layer board measuring 95 × 60 mm, with 37 components from 31 distinct parts.

Its main chip is the ATmega328P-AU, from the AVR/Arduino family. Other key parts include the AMS1117-5.0 and MCP73831. By type, the board carries 9 resistors, 8 connectors, 6 capacitors, 3 ICs, 3 diodes and 2 LEDs.

It belongs with the power & battery designs in this gallery.

From the project

MotoKey: Aftermarket e-moto security system - encrypted keycard lock for electric motorcycles

Encrypted keycard lock for electric motorcycles. Cut the power, pocket the key.

Live site: https://kindro.store Hardware design: https://kindro.store/hardware-design.html

MotoKey is an aftermarket security system for electric mopeds/motorcycles/scooters. It's a small weatherproof box that wires inline with the battery and cuts power unless an encrypted key fob is nearby. No key = no power = bike doesn't move.

Main components on the Motokey

Motokey bill of materials (BOM)

37 components, 31 distinct parts.

QtyPartRefs
1
ATmega328P-AU
U1
1
AMS1117-5.0
U2
1
MCP73831
U3
1
MMBT2222A
Q1
1
12V_IN
J1
1
RELAY_OUT
J2
1
ICSP
J3
1
SX1278
J4
1
E-PAPER
J5
1
ZONES
J6
1
USB_CHG
J7
1
GPS
J8
1
LiPo 3.7V
BT1
1
Buzzer
BZ1
1
SRD-05VDC-SL-C
K1
1
LEARN
SW1
1
NTC 10k
TH1
1
Red
LED1
1
Green
LED2
1
SMBJ16A
D1
Show 11 more
QtyPartRefs
1
1N4148
D2
1
BAT54
D3
2
10uF
C1, C3
3
100nF
C2, C4, C5
1
4.7uF
C6
2
330
R1, R2
1
1k
R3
3
10k
R4, R6, R7
1
100
R5
1
LDR
R8
1
2k
R9

Motokey design files

The KiCad project lives in the yuluis/motokey repository on GitHub; these links point at the commit this page was built from.

Motokey: common questions

What microcontroller does the Motokey use?

The Motokey is built around the ATmega328P-AU, from the AVR/Arduino family.

How big is the Motokey PCB?

The Motokey measures 95 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Motokey?

37 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the Motokey design files?

From the yuluis/motokey repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Motokey design in my own project?

The repository has no license, so all rights stay with yuluis. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Motokey without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards