RedSun Clock
YuWei-CH·RedSun_Clock·Hardware/PCB design/YWS_clock.kicad_pcb
About the RedSun Clock PCB
RedSun Clock is an open source AVR/Arduino PCB design by YuWei-CH, published on GitHub. It is a 2-layer board measuring 140 × 90 mm, with 57 components from 26 distinct parts.
Its main chip is the ED281DT, from the AVR/Arduino family. Other key parts include the L7805CDT-TR, A 08-LC-TT and ED241DT. By type, the board carries 16 resistors, 15 capacitors, 7 ICs, 5 diodes, 4 connectors and 4 switches.
It belongs with the displays & leds designs in this gallery.
From the project
A consumer electronics clock consisting of LED Matrix, atmega328, crystal clock and Joystick on a PCB.
This project consists of two main parts: Hardware and Software.

Main components on the RedSun Clock
RedSun Clock bill of materials (BOM)
57 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805CDT-TR L7805 | TO-252-2 | U1 |
| 1 | ED281DT ATmega328-PU | DIP-28_W7.62mm | U2 |
| 1 | A 08-LC-TT DS1307_DIP-8 | DIP-8_W7.62mm | U3 |
| 4 | ED241DT MAX7219 | DIP-24_W7.62mm | U4, U5, U6, U7 |
| 1 | Q 0,032768-JTX310-12,5-20-T1-HMR-50K-LF Crystal_32768Hz | Crystal_SMD_2Pin_3.2x1.5mm | Y1 |
| 1 | ECS-160-20-5PXDN-TR Crystal_16MHz | Crystal_SMD_HC49-SD | Y2 |
| 2 | 61300611121 Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J1, J3 |
| 1 | PJ-102AH | PJ-102AH | J2 |
| 1 | PRPC003DAAN-RC Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | BS-7 Battery_Cell | BatteryHolder_Keystone_106_1x20mm | BT1 |
| 1 | PS1420P02CT Buzzer | Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 4 | B3FS-1000P Omron_B3F_SPST | SW_SPST_Omron_B3FS-100xP | SW1, SW2, SW3, SW4 |
| 2 | TestPoint | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1, TP2 |
| 1 | 150080RS75000 LED_0805 | LED_0805_2012Metric | D1 |
| 4 | KWM-30881CVB | KWM-30881CVB | D2, D3, D4, D5 |
| 8 | 08055C104KAT2A C_0805_0.1uf | C_0805_2012Metric | C1, C2, C5, C7, C8, C10, C12, C13 |
| 2 | CC0805JRNPO9BN220 C_0805_22pf | C_0805_2012Metric | C3, C4 |
| 1 | CC0805KKX7R8BB105 C_0805_1uf | C_0805_2012Metric | C6 |
| 4 | GRM21BR61E106KA73L C_0805_10uf | C_0805_2012Metric | C9, C11, C14, C15 |
| 4 | RC0805FR-0710KL R_0805_10K | R_0805_2012Metric | R1, R11, R12, R13 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | N/A R_0805_2.2K | R_0805_2012Metric | R2 |
| 3 | RC0805FR-0747RL R_0805_47 | R_0805_2012Metric | R3, R4, R17 |
| 2 | RC0805FR-074K7L R_0805_4.7K | R_0805_2012Metric | R5, R6 |
| 4 | RC0805FR-0722KL R_0805_22K | R_0805_2012Metric | R7, R8, R9, R10 |
| 1 | PDV-P8103 PhotoconductivePhotocell | R_LDR_4.9x4.2mm_P2.54mm_Vertical | R14 |
| 1 | RC0805FR-07100KL R_0805_100K | R_0805_2012Metric | R15 |
RedSun Clock design files
The KiCad project lives in the YuWei-CH/RedSun_Clock repository on GitHub; these links point at the commit this page was built from.
RedSun Clock: common questions
What microcontroller does the RedSun Clock use?
The RedSun Clock is built around the ED281DT, from the AVR/Arduino family.
How big is the RedSun Clock PCB?
The RedSun Clock measures 140 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RedSun Clock?
57 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the RedSun Clock design files?
From the YuWei-CH/RedSun_Clock repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RedSun Clock design in my own project?
The repository has no license, so all rights stay with YuWei-CH. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RedSun Clock without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k