5 open source boards using the L7805CDT-TR

Real designs built with the L7805CDT-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the L7805CDT-TR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the L7805CDT-TR connects to, and the resistors, capacitors and other passives placed on it.

  • The INPUT pin is tied to 12V on 3 of 5 designs (a signal on 2).
  • The OUTPUT pin is tied to GND on 3 of 5 designs.
  • The GROUND pin is tied to VCC on 3 of 5 designs (GND on 2).
  • The OUTPUT pin has a capacitor to GND on 2 of 5 designs, most often 1 µF (then 100 nF).
INPUTpin 1Connected to: 12V 60% · a signal 40%
OUTPUTpin 2Connected to: GND 60% · 5V 20% · a signal 20%
  • Capacitor to GND on 40% · 1 µF (1), 100 nF (1)
GROUNDpin 3Connected to: VCC 60% · GND 40%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pico2DVI by Aiden-Chostner, Fast open switch r1.0 by PCB-Arts, Annahsingh clock by Annah03 and Stm32 balancingRobot by JwAhn0830.

The L7805CDT-TR in open source designs

The gallery holds 5 open source boards using the L7805CDT-TR from 5 GitHub repositories; a typical one measures about 140 × 90 mm and carries around 64 components.

60% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is Pico2DVI by Aiden-Chostner.

Parts used alongside the L7805CDT-TR

Microcontrollers on boards using the L7805CDT-TR

What boards using the L7805CDT-TR are built for

L7805CDT-TR: common questions

Where can I find a L7805CDT-TR reference design?

Each of the 5 boards on this page is a real design using the L7805CDT-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the L7805CDT-TR INPUT pin connected?

The INPUT pin is tied to 12V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the L7805CDT-TR.

How is the L7805CDT-TR OUTPUT pin connected?

The OUTPUT pin is tied to GND on 3 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the L7805CDT-TR.

How is the L7805CDT-TR GROUND pin connected?

The GROUND pin is tied to VCC on 3 of 5 designs (GND on 2). Counted from the KiCad layouts of 5 open source designs using the L7805CDT-TR.

Which microcontrollers do boards using the L7805CDT-TR use?

Most are built on AVR/Arduino (2), FPGA (1), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the L7805CDT-TR?

The median is 140 × 90 mm, and 60% are two-layer designs.

What is the most popular open source board using the L7805CDT-TR?

By GitHub stars, Pico2DVI by Aiden-Chostner, with 41 stars.

Can I simulate one of these boards using the L7805CDT-TR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part