XIAO Plus Base V1.0
yuxiangcheng2002·xiao-b2b-adapter·reference/xiao-plus-base/XIAO Plus Base V1.0/XIAO Plus Base V1.0.kicad_pcb
About the XIAO Plus Base V1.0 PCB
XIAO Plus Base V1.0 is an open source ESP32 PCB design by yuxiangcheng2002, published on GitHub. It is a 2-layer board measuring 42 × 35.6 mm, with 4 components from 3 distinct parts.
Its main chip is the XIAO-ESP32-S3-Plus-SMD, from the ESP32 family. By type, the board carries 3 connectors and 1 IC.
From the project
XIAO ESP32S3 Sense B2B (DF40) to FPC/FFC adapter board
Main components on the XIAO Plus Base V1.0
XIAO Plus Base V1.0 bill of materials (BOM)
4 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-S3-Plus-SMD | XIAO-ESP32-S3-Plus-SMD | U1 |
| 2 | Header 1x13 2.54mm 思拓展 | H11-2.54-35 | J1, J2 |
| 1 | PF-2056 Header 1x10 2.54mm 思拓展 | H10-2.54 | J3 |
XIAO Plus Base V1.0 design files
The KiCad project lives in the yuxiangcheng2002/xiao-b2b-adapter repository on GitHub; these links point at the commit this page was built from.
XIAO Plus Base V1.0: common questions
What microcontroller does the XIAO Plus Base V1.0 use?
The XIAO Plus Base V1.0 is built around the XIAO-ESP32-S3-Plus-SMD, from the ESP32 family.
How big is the XIAO Plus Base V1.0 PCB?
The XIAO Plus Base V1.0 measures 42 × 35.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the XIAO Plus Base V1.0?
4 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the XIAO Plus Base V1.0 design files?
From the yuxiangcheng2002/xiao-b2b-adapter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the XIAO Plus Base V1.0 design in my own project?
The repository has no license, so all rights stay with yuxiangcheng2002. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the XIAO Plus Base V1.0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in xiao-b2b-adapter
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k