UGR Driver Screen 26
z8bi·University·UGR/New_Screen_26/UGR_Driver_Screen_26_PCB_V2/UGR_Driver_Screen_26.kicad_pcb
About the UGR Driver Screen 26 PCB
UGR Driver Screen 26 is an open source STM32 PCB design by z8bi, published on GitHub. It is a 2-layer board measuring 133.5 × 84 mm, with 69 components from 37 distinct parts.
Its main chip is the STM32F767VGTX, from the STM32 family. Other key parts include the TPS562200, SI2347DS-T1-GE3 and MCP2562-E-MF. By type, the board carries 18 capacitors, 11 resistors, 6 ICs, 6 diodes, 4 connectors and 2 fuses.
From the project
fork for advanced programming 3 assignment
Main components on the UGR Driver Screen 26
UGR Driver Screen 26 bill of materials (BOM)
69 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS562200 | SOT-23-6 | U1 |
| 1 | STM32F767VGTX STM32F767VGTx | LQFP-100_14x14mm_P0.5mm | U2 |
| 1 | SI2347DS-T1-GE3 LM358DT | SOIC127P600X175-8N | U3 |
| 1 | MCP2562-E-MF ~ | SOT95P237X111-3N | U4 |
| 1 | SI2347DS-T1-GE3 MCP2562-E-SN | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | SI2347DS-T1-GE3 ~ | SOT95P237X111-3N | U6 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | CONN_02X20_SOCKET Conn_02x20_Socket | PinSocket_2x20_P2.54mm_Vertical | J3 |
| 1 | CONN_01X06 DF51-4DP-2DS_50_ | HIROSE_DF51-4DP-2DS_50_ | J4 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Crystal_GND24 | Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mm | ABM3-8.000MHZ-10-1-U-T1 |
| 1 | PXP4013/08P/PC | Bulgin_4000_PXP4013-08S-PC | CONN1 |
| 6 | 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C_NRST1, C_SD1, C_TPS1, C_TPS2, C_TPS3, C_VREF1 |
| 2 | 0.75A | Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F2, F3 |
| 1 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R_DISCH1 |
| 4 | 250 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R_LED1, R_LED2, R_LED3, R_LIM1 |
| 4 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R_SD1, R_SD2, R_SD5, R_SD6 |
| 2 | 30k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R_SD3, R_SD4 |
| 1 | AYZ0102AGRLC | SW_AYZ0102AGRLC | S1 |
| 1 | ~ | SOP65P640X120-8N | TPS2112APW1 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CAN_TVS | SOT-23 | D1 |
| 2 | LED | PinHeader_1x02_P2.54mm_Vertical | D2, D3 |
| 1 | BZX384XXXX LED | PinHeader_1x02_P2.54mm_Vertical | D4 |
| 1 | BZX384x | D_SOD-323 | D5 |
| 1 | BZX384xxxx | D_SOD-323 | D7 |
| 1 | 4.7u | L_1206_3216Metric_Pad1.42x1.75mm_HandSolder | L2_U1 |
| 2 | 2.2u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1_CAP1, C2_CAP1 |
| 2 | 10p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1_OSC1, C2_OSC1 |
| 10 | 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1_VDD1, C2_VDD1, C3_VDD1, C4_VDD1, C5_VDD1, C6_VD1, C8_VDDA1, C12_U1 +2 |
| 1 | 1.0u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9_VDDA1 |
| 1 | 15u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C10_U1 |
| 2 | 22u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C16_U1, C18_U1 |
| 5 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1_BOOT0, R1_NRST1, R2_VBUS1, R5_U1, R11_U1 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1_CC1, R2_CC1 |
| 2 | 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1_I2C1, R2_I2C1 |
| 1 | 20k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1_VBUS1 |
| 1 | 33.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10_U1 |
UGR Driver Screen 26 design files
The KiCad project lives in the z8bi/University repository on GitHub; these links point at the commit this page was built from.
UGR Driver Screen 26: common questions
What microcontroller does the UGR Driver Screen 26 use?
The UGR Driver Screen 26 is built around the STM32F767VGTX, from the STM32 family.
How big is the UGR Driver Screen 26 PCB?
The UGR Driver Screen 26 measures 133.5 × 84 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the UGR Driver Screen 26?
69 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the UGR Driver Screen 26 design files?
From the z8bi/University repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the UGR Driver Screen 26 design in my own project?
The repository has no license, so all rights stay with z8bi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the UGR Driver Screen 26 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in University
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k