UGR-22 Screen
z8bi·University·UGR/Old_Screen_25/Screen/UGR-22 Screen.kicad_pcb
About the UGR-22 Screen PCB
UGR-22 Screen is an open source STM32 PCB design by z8bi, published on GitHub. It is a 2-layer board measuring 69.2 × 50 mm, with 70 components from 35 distinct parts.
Its main chip is the STM32L432KCU6, from the STM32 family. Other key parts include the S25FL128S, MCP2562-E-MF, 62208VERSIOM, ^ and TSC2004IRTJ. By type, the board carries 26 capacitors, 17 resistors, 7 ICs, 7 connectors, 5 jumpers and 3 diodes.
From the project
fork for advanced programming 3 assignment
Main components on the UGR-22 Screen
UGR-22 Screen bill of materials (BOM)
70 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L432KCU6 STM32L432K | UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm | U1 |
| 1 | S25FL128S | WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm | U2 |
| 1 | MCP2562-E-MF | DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U3 |
| 1 | 62208VERSIOM TPS562200 | SOT-23-6 | U4 |
| 1 | ^ TPS562200 | SOT-23-6 | U5 |
| 1 | TSC2004IRTJ | QFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U6 |
| 1 | MCP2562-E-SN | SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | 636L3I024M00000 8MHz | Oscillator_SMD_Fordahl_DFAS15-4Pin_5.0x3.2mm | X1 |
| 1 | 9HT12-32.768KDZF-T 32.768KHz | Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm_HandSoldering | Y1 |
| 1 | 53261-1071 Conn_01x08_Male | Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal | J1 |
| 1 | SWD | Harwin_M20-89004xx_1x04_P2.54mm_Horizontal | J2 |
| 1 | Mouser DT028ATFT | Hirose_FH12-45S-0.5SH_1x45-1MP_P0.50mm_Horizontal | J3 |
| 1 | Mouser SW1 | Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J4 |
| 1 | Mouser SW2 | Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J5 |
| 1 | Mouser SW3 | Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J6 |
| 1 | Mouser SW4 | Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J7 |
| 1 | 1206L075/16WR 0.75A | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 3 | JMP_SW1_1 | SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm_NumberLabels | JP1, JP3, JP5 |
| 2 | JMP_SW1_2 | SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm_NumberLabels | JP2, JP4 |
| 1 | SS24A | D_SMA | D1 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SMBJ15A 15V | D_SMA_Handsoldering | D2 |
| 1 | SZNUP2105L CAN_TVS | SOT-23 | D3 |
| 2 | Mouser 4.7u | L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | L1, L2 |
| 14 | Mouser 0.1u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C4, C5, C6, C7, C8, C11, C12 +6 |
| 2 | Mouser 19pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C3 |
| 2 | Mouser 15u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C9, C10 |
| 4 | Mouser 22u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C15, C16, C17, C18 |
| 1 | 8+MOREINBOOK 10n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C19 |
| 3 | 10n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C20, C21, C22 |
| 5 | 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R4, R5, R9, R11 |
| 4 | 100 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3, R6, R7 |
| 1 | find 56.2k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8 |
| 1 | find 29.4k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10 |
| 4 | 1K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12, R13, R14, R15 |
| 2 | 1.2k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R16, R17 |
UGR-22 Screen design files
The KiCad project lives in the z8bi/University repository on GitHub; these links point at the commit this page was built from.
UGR-22 Screen: common questions
What microcontroller does the UGR-22 Screen use?
The UGR-22 Screen is built around the STM32L432KCU6, from the STM32 family.
How big is the UGR-22 Screen PCB?
The UGR-22 Screen measures 69.2 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the UGR-22 Screen?
70 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the UGR-22 Screen design files?
From the z8bi/University repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the UGR-22 Screen design in my own project?
The repository has no license, so all rights stay with z8bi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the UGR-22 Screen without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in University
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k