Fonte 18V
ZeniteSolar·MFP19
About the Fonte 18V PCB
Fonte 18V is an open source PCB design by ZeniteSolar, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 52 mm, with 31 components from 25 distinct parts.
Other key parts include the LMR16030. By type, the board carries 6 resistors, 4 connectors, 1 IC, 1 transistor, 1 fuse and 1 LED.
It belongs with the power & battery designs in this gallery.
From the project
Fonte Principal de 18V
Este módulo é responsável por fornecer uma tensao fixa e estavel de 18V para alimentaçao dos modulos que estao na rede CAN
CI Ultilizado: Conversor LMR16030 Datasheet

Main components on the Fonte 18V
Fonte 18V bill of materials (BOM)
31 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMR16030 | Texas_R-PDSO-G8_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U1 |
| 1 | Si2308CDS | SOT-23 | Q1 |
| 2 | MSTBA | PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J1, J2 |
| 2 | RJ45_Shielded | RJ45_YH59_01 | J3, J4 |
| 3 | 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | CBoot1, Cin2, Cin3 |
| 1 | na | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Cff1 |
| 2 | 10u | CP_Radial_D5.0mm_P2.50mm | Ci1, Ci2 |
| 2 | 47u | CP_Radial_D5.0mm_P2.50mm | Co1, Co2 |
| 1 | o.1u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Co3 |
| 1 | 0.1u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Co4 |
| 1 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Cs1 |
| 1 | 2A | Fuse_Holder_5x20 | F1 |
| 1 | 1k5 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | RLed1 |
| 1 | 8k2 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Rfbb1 |
| 1 | 230k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Rfbt2 |
| 1 | 2k2 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Rs1 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Led1 |
| 1 | MBR20200CTG | TO-220-3_Horizontal_TabDown_SMD | D1 |
| 1 | 100uH | L_Radial_D21.0mm_P19.00mm | L1 |
| 1 | 47k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 220K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 100K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | 10K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
| 1 | NA | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
Fonte 18V design files
The KiCad project lives in the ZeniteSolar/MFP19 repository on GitHub; these links point at the commit this page was built from.
- Layoutfonte_18V.kicad_pcb
Fonte 18V: common questions
How big is the Fonte 18V PCB?
The Fonte 18V measures 100 × 52 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fonte 18V?
31 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Fonte 18V design files?
From the ZeniteSolar/MFP19 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Fonte 18V design in my own project?
Yes, under the terms of its GPL-3.0 license, which ZeniteSolar chose for the repository.
More boards in MFP19
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k