EL-Calendar
zephray·EL-Calendar·pcb/EL-Calendar.kicad_pcb
About the EL-Calendar PCB
EL-Calendar is an open source STM32 PCB design by zephray, published on GitHub. It is a 2-layer board measuring 139 × 47 mm, with 51 components from 29 distinct parts.
Its main chip is the STM32F103CBTx, from the STM32 family. Other key parts include the SY8120, LM1117-3.3, W25Q32JVZP and USBLC6-2SC6. By type, the board carries 19 capacitors, 13 resistors, 5 ICs, 4 switches, 3 connectors and 2 crystals.
Main components on the EL-Calendar
EL-Calendar bill of materials (BOM)
51 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SY8120 | TSOT-23-6 | U1 |
| 1 | STM32F103CBTx | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | LM1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | W25Q32JVZP | WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U4 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U5 |
| 1 | Crystal | Crystal_SMD_TXC_9HT11-2Pin_2.0x1.2mm_HandSoldering | Y1 |
| 1 | 16MHz | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y2 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J1 |
| 1 | Conn_02x10_Odd_Even | PinHeader_2x10_P2.00mm_Vertical | J2 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J3 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P1.27mm_Vertical_SMD | ARM_JTAG1 |
| 1 | CR2032 | BatteryHolder_Keystone_1060_1x2032 | BT1 |
| 4 | SW_Push | SW_SPST_CK_RS282G05A3 | SW1, SW2, SW3, SW4 |
| 1 | B72590D0050H160 | D_0402_1005Metric | D1 |
| 1 | 100R | L_0603_1608Metric | FB1 |
| 1 | 4.7uH | L_Vishay_IHLP-1212 | L1 |
| 4 | 18pF | C_0603_1608Metric | C1, C2, C4, C5 |
| 7 | 470nF | C_0603_1608Metric | C3, C7, C9, C11, C12, C14, C17 |
| 1 | 100nF | C_0603_1608Metric | C6 |
| 4 | 10uF | C_0603_1608Metric | C8, C15, C16, C18 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4.7uF | C_0603_1608Metric | C10, C13 |
| 1 | 100nF | C_0805_2012Metric | C19 |
| 1 | 2.2M | C_0603_1608Metric | R1 |
| 4 | 10K | C_0603_1608Metric | R2, R3, R6, R7 |
| 1 | 20K | R_0603_1608Metric | R4 |
| 1 | 10K | R_0603_1608Metric | R5 |
| 3 | 100K | C_0603_1608Metric | R8, R9, R10 |
| 1 | 0 | R_0805_2012Metric | R11 |
| 2 | 22 | C_0603_1608Metric | R12, R13 |
EL-Calendar design files
The KiCad project lives in the zephray/EL-Calendar repository on GitHub; these links point at the commit this page was built from.
EL-Calendar: common questions
What microcontroller does the EL-Calendar use?
The EL-Calendar is built around the STM32F103CBTx, from the STM32 family.
How big is the EL-Calendar PCB?
The EL-Calendar measures 139 × 47 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EL-Calendar?
51 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the EL-Calendar design files?
From the zephray/EL-Calendar repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the EL-Calendar design in my own project?
The repository has no license, so all rights stay with zephray. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the EL-Calendar without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k