35 open source boards using the W25Q32JVZP

Real designs built with the W25Q32JVZP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

35 boardsClear filters|Most starred

How designs wire the W25Q32JVZP

Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the W25Q32JVZP connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 17 of 23 designs, most often 100 nF (then 1 µF).
  • The CS pin has a pull-up to 3.3V on 12 of 23 designs, most often 10 kΩ (then 1 kΩ).
CSpin 1Connected to: The microcontroller 83%
  • Pull-up to 3.3V on 52% · 10 kΩ (7), 1 kΩ (2), 4.7 kΩ (1)
  • Series resistor on 39% · 1 kΩ (7), 4.7 kΩ (1), 10 kΩ (1)
GNDpin 4Connected to: GND 96%
VCCpin 8Connected to: 3.3V 92%
  • Decoupling capacitor on 74% · 100 nF (24), 1 µF (3), 10 µF (2)
EPpin 9Connected to: GND 81% · not connected 19%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Resonance by gregdavill, 10087 by RGBKB, PC-AXE by aadhi1014 and Opentrig by Dawson-HEP.

The W25Q32JVZP in open source designs

The gallery holds 35 open source boards using the W25Q32JVZP from 23 GitHub repositories; a typical one measures about 54.8 × 51 mm and carries around 68 components.

63% use four copper layers or more, and 31% carry an open source license.

The most starred is Resonance by gregdavill.

Microcontrollers on boards using the W25Q32JVZP

W25Q32JVZP: common questions

Where can I find a W25Q32JVZP reference design?

Each of the 35 boards on this page is a real design using the W25Q32JVZP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the W25Q32JVZP VCC pin?

The VCC pin has a decoupling capacitor on 17 of 23 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 23 open source designs using the W25Q32JVZP.

What pull-up resistor is used on the W25Q32JVZP CS pin?

The CS pin has a pull-up to 3.3V on 12 of 23 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 23 open source designs using the W25Q32JVZP.

What parts are used alongside the W25Q32JVZP?

The RP2040, USBLC6-2SC6, AMS1117-5.0, CH340E and SHT4x appear in the most repositories here.

Which microcontrollers do boards using the W25Q32JVZP use?

Most are built on RP2040/RP2350 (20), ESP32 (8), STM32 (3) and FPGA (1).

How big is a typical board using the W25Q32JVZP?

The median is 54.8 × 51 mm, and 37% are two-layer designs.

What is the most popular open source board using the W25Q32JVZP?

By GitHub stars, Resonance by gregdavill, with 178 stars.

Can I simulate one of these boards using the W25Q32JVZP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part