ZBoard-V1

ZeusyBoy98·ZBoard-V1·PCB/ZBoard V1.kicad_pcb

ZBoard-V1 PCB layout, top view — open source RP2040/RP2350 board by ZeusyBoy98

About the ZBoard-V1 PCB

ZBoard-V1 is an open source RP2040/RP2350 PCB design by ZeusyBoy98, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 333 × 119 mm, with 169 components from 9 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. By type, the board carries 84 switches, 84 diodes and 1 IC.

It belongs with the keyboards and iot & wireless designs in this gallery.

From the project

A wireless keyboard built to suit my needs

Here's the version with more personality:

ZBoard-V1, from the project README
From the project README

Main components on the ZBoard-V1

ZBoard-V1 bill of materials (BOM)

169 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Pico
U3
73
SW_Push
SW1, SW2, SW7, SW8, SW9, SW10, SW11, SW13 +65
2
SW_Push
SW3, SW78
2
SW_Push
SW4, SW70
2
SW_Push
SW5, SW74
3
SW_Push
SW6, SW12, SW18
1
SW_Push
SW24
1
SW_Push
SW77
84
D
D1, D2, D3, D4, D5, D6, D7, D8 +76

ZBoard-V1 design files

The KiCad project lives in the ZeusyBoy98/ZBoard-V1 repository on GitHub; these links point at the commit this page was built from.

ZBoard-V1: common questions

What microcontroller does the ZBoard-V1 use?

The ZBoard-V1 is built around the Pico, from the RP2040/RP2350 family.

How big is the ZBoard-V1 PCB?

The ZBoard-V1 measures 333 × 119 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ZBoard-V1?

169 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ZBoard-V1 design files?

From the ZeusyBoy98/ZBoard-V1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ZBoard-V1 design in my own project?

Yes, under the terms of its GPL-3.0 license, which ZeusyBoy98 chose for the repository.

Can I test firmware for the ZBoard-V1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards