Geomagnetometer
About the Geomagnetometer PCB
Geomagnetometer is an open source PCB design by ZhuYanzhen1, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 17.7 × 19.1 mm, with 20 components from 10 distinct parts.
Other key parts include the RM3100_13156. By type, the board carries 10 resistors, 8 capacitors, 1 IC and 1 connector.
It belongs with the power & battery designs in this gallery.
From the project
本项目是全国大学生智能车竞赛GDUT 2022年极速越野组的项目文件。采用了LQR控制器和多速率卡尔曼融合算法，并在单片机上实现。This project is the project document for the GDUT 2022 Extreme Off-Road Category of the National Student Intelligent Vehicle Competition.
This project is a Windows CLion IDE file for the MM32F3277G9 chip and a circuit design for the main control board based on the MM32F3277G9 chip. The software code contains the link files required for GCC, CMake files, clang-format files, Doxygen configuration files, etc. to ensure that this package is ready to use when it arrives. The hardware mainly contains the schematic and PCB files, and the Gerber files will be released in the form of Releases.The adapted tuning tool is developed using Qt, and the repository contains the Qt source code files for the tool. Some…
Main components on the Geomagnetometer
Geomagnetometer bill of materials (BOM)
20 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RM3100_13156 | QFN-28-1EP_4x4mm_P0.4mm_EP2.4x2.4mm | U1 |
| 1 | Conn_01x06 | JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J1 |
| 2 | 10uF | C_0603_1608Metric | C1, C3 |
| 2 | 1uF | C_0603_1608Metric | C2, C4 |
| 2 | 4.7uF | C_0603_1608Metric | C5, C7 |
| 2 | 100nF | C_0603_1608Metric | C6, C8 |
| 1 | 33kR | R_0603_1608Metric | R1 |
| 6 | 121R | R_0603_1608Metric | R2, R3, R4, R5, R6, R7 |
| 1 | PN13101(Z) | PN13101 | R8 |
| 2 | PN13104(XY) | PN13104 | R9, R10 |
Geomagnetometer design files
The KiCad project lives in the ZhuYanzhen1/MM32_CLion repository on GitHub; these links point at the commit this page was built from.
Geomagnetometer: common questions
How big is the Geomagnetometer PCB?
The Geomagnetometer measures 17.7 × 19.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Geomagnetometer?
20 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Geomagnetometer design files?
From the ZhuYanzhen1/MM32_CLion repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Geomagnetometer design in my own project?
Yes, under the terms of its AGPL-3.0 license, which ZhuYanzhen1 chose for the repository.
More boards in MM32_CLion
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k