Pd power supply
ziteh·pd-power-supply
About the Pd power supply PCB
Pd power supply is an open source STM32 PCB design by ziteh, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 100 × 50 mm, with 89 components from 49 distinct parts.
Its main chip is the STM32F030C8Tx, from the STM32 family. Other key parts include the MP4245, CH224Q, ADuM1201AR and TPS5431. By type, the board carries 33 capacitors, 31 resistors, 5 ICs, 5 diodes, 4 connectors and 4 switches.
It belongs with the power & battery designs in this gallery.
From the project
Adjustable power supply based on USB PD (WIP)
Adjustable power supply based on USB PD (Power Delivery).
- CentyLab/PocketPD_HW: Hardware repo for PocketPD - z4yx/USB-C-PPS: USB-PD charger as a programmable power supply. - tobychui/PD-Adjustable-DC-Power-Supply: A DIY, USB PD powered, pocket sized adjustable DC / lab bench power supply for electronic makers - wagiminator/ATtiny814-USB-PD-Adapter: USB Type-C Power Delivery Trigger and Monitoring Board - MINIWARE MDP-P906(300W) - FNIRSI DPS-150(150W) - Alientek DP100(100W)
Main components on the Pd power supply
Pd power supply bill of materials (BOM)
89 components, 49 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP4245 | QFN-21_MP4245_MNP | U1 |
| 1 | CH224Q | DFN-10_EP_2x2_Pitch0.4mm | U2 |
| 1 | ADuM1201AR | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | STM32F030C8Tx | LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | TPS5431 | TI_SO-PowerPAD-8_ThermalVias | U5 |
| 1 | 8MHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | SWD | PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | Display | PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | BTN_B | SW_SPST_TL3342 | SW1 |
| 1 | BTN_A | SW_SPST_TL3342 | SW2 |
| 1 | RESET | SW_SPST_TL3342 | SW3 |
| 1 | BOOT0 | SW_SPST_TL3342 | SW4 |
| 1 | NTC 10k | R_0603_1608Metric | TH1 |
| 1 | Green | LED_0805_2012Metric | LD1 |
| 1 | Red | LED_0805_2012Metric | LD2 |
| 2 | ESDA25P35 | ST_QFN-2L_1.6x1.0mm | D1, D4 |
| 1 | ESDA25W | SOT-323_SC-70 | D2 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SS54 | D_SMA | D3, D5 |
| 1 | 4.7uH | L_Changjiang_FXL1040 | L1 |
| 1 | 15uH | L_Changjiang_FXL0630 | L2 |
| 2 | 100uF | CP_Elec_6.3x7.7 | C1, C16 |
| 4 | 10uF | C_0805_2012Metric | C2, C3, C14, C15 |
| 9 | 100nF | C_0603_1608Metric | C4, C12, C17, C22, C24, C25, C29, C30 +1 |
| 6 | 1uF | C_0603_1608Metric | C5, C6, C9, C11, C13, C27 |
| 2 | 220nF | C_0603_1608Metric | C7, C8 |
| 1 | 47nF | C_0402_1005Metric | C10 |
| 4 | 8.2pF | C_0402_1005Metric | C18, C19, C20, C21 |
| 1 | 4.7uF | C_0603_1608Metric | C23 |
| 1 | 10nF | C_0402_1005Metric | C26 |
| 1 | 10uF 50V | C_0805_2012Metric | C28 |
| 1 | 10nF 50V | C_0402_1005Metric | C31 |
| 1 | 220uF 10V | CP_EIA-7343-31_Kemet-D | C32 |
| 1 | 100k | R_0603_1608Metric | R1 |
| 1 | 36k | R_0603_1608Metric | R2 |
| 1 | 0R | R_0402_1005Metric | R3 |
| 1 | 120k | R_0402_1005Metric | R4 |
| 4 | 10R | R_0402_1005Metric | R5, R6, R19, R20 |
| 1 | 80.6k | R_0603_1608Metric | R7 |
| 1 | 6.2k | R_0603_1608Metric | R8 |
| 1 | 20mR | R_1206_3216Metric | R9 |
| 12 | 10k | R_0402_1005Metric | R10, R13, R14, R15, R16, R21, R22, R23 +4 |
| 2 | 2.2k | R_0402_1005Metric | R11, R12 |
| 2 | R | R_0603_1608Metric | R17, R18 |
| 1 | 10k | R_0603_1608Metric | R24 |
| 1 | 5.8k | R_0603_1608Metric | R25 |
| 2 | 4.7k | R_0402_1005Metric | R28, R30 |
Pd power supply design files
The KiCad project lives in the ziteh/pd-power-supply repository on GitHub; these links point at the commit this page was built from.
- Layoutpd_power_supply.kicad_pcb
- Schematicpd_power_supply.kicad_sch
Pd power supply: common questions
What microcontroller does the Pd power supply use?
The Pd power supply is built around the STM32F030C8Tx, from the STM32 family.
How big is the Pd power supply PCB?
The Pd power supply measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pd power supply?
89 components, from 49 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pd power supply design files?
From the ziteh/pd-power-supply repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pd power supply design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which ziteh chose for the repository.
Can I test firmware for the Pd power supply without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k