5 open source boards using the CH224Q

Real designs built with the CH224Q, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the CH224Q

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the CH224Q connects to, and the resistors, capacitors and other passives placed on it.

  • The VHV_1 pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 10 µF).
  • The VBUS_8 pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 10 µF).
  • The PG_10 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ.
  • The CFG2/SCL_2 pin has a pull-up to 3.3V on 4 of 5 designs, most often 4.7 kΩ (then 2.2 kΩ).
GND_0pin 0Connected to: GND 100%
VHV_1pin 1Connected to: VBUS 80% · a signal 20%
  • Decoupling capacitor on 100% · 1 µF (5), 10 µF (1)
CFG2/SCL_2pin 2Connected to: The microcontroller 60%
  • Pull-up to 3.3V on 80% · 4.7 kΩ (2), 2.2 kΩ (2)
  • Series resistor on 40% · 100 Ω (1), 0 Ω (1)
CFG3/SDA_3pin 3Connected to: The microcontroller 60%
  • Pull-up to 3.3V on 80% · 4.7 kΩ (2), 2.2 kΩ (2)
  • Series resistor on 40% · 100 Ω (1), 0 Ω (1)
VBUS_8pin 8Connected to: VBUS 80% · a signal 20%
  • Decoupling capacitor on 100% · 1 µF (5), 10 µF (1)
CFG1_9pin 9Connected to: Signal 100%
  • Resistor to GND on 80% · 120 kΩ (2), 210 kΩ (1), 56 kΩ (1)
PG_10pin 10Connected to: Signal 100%
  • Pull-up to 3.3V on 100% · 10 kΩ (5)
  • Series resistor on 40% · 20 kΩ (1), 47 kΩ (1), 0 Ω (1)
EP_11pin 11Connected to: GND 100%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OSSM ALT SERVO V3 4 by jollydodo, Core by Hive-RSI-Lab, Iasis by hydazz and EnvDaqBox-PCB by Yongci.

The CH224Q in open source designs

The gallery holds 5 open source boards using the CH224Q from 5 GitHub repositories; a typical one measures about 100 × 71 mm and carries around 120 components.

80% use four copper layers or more, and 80% carry an open source license.

The most starred is OSSM ALT SERVO V3 4 by jollydodo.

Microcontrollers on boards using the CH224Q

CH224Q: common questions

Where can I find a CH224Q reference design?

Each of the 5 boards on this page is a real design using the CH224Q. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the CH224Q VHV_1 pin?

The VHV_1 pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the CH224Q.

What decoupling capacitors do designs use on the CH224Q VBUS_8 pin?

The VBUS_8 pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the CH224Q.

What pull-up resistor is used on the CH224Q PG_10 pin?

The PG_10 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the CH224Q.

Which microcontrollers do boards using the CH224Q use?

Most are built on ESP32 (3), Raspberry Pi (1) and STM32 (1).

How big is a typical board using the CH224Q?

The median is 100 × 71 mm, and 20% are two-layer designs.

What is the most popular open source board using the CH224Q?

By GitHub stars, OSSM ALT SERVO V3 4 by jollydodo, with 31 stars.

Can I simulate one of these boards using the CH224Q before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part