Line follower-Bot
ZIZO932·Line-follower-Bot·Schematic and PCB/Line follower Fallout.kicad_pcb
About the Line follower-Bot PCB
Line follower-Bot is an open source AVR/Arduino PCB design by ZIZO932, published on GitHub. It is a 2-layer board measuring 150 × 47 mm, with 15 components from 10 distinct parts.
Its main chip is the Arduino_Mini_01_Socket, from the AVR/Arduino family. Other key parts include the DRV8835DSSR and HC-05. By type, the board carries 4 resistors, 3 modules, 3 connectors, 2 ICs and 1 switch.
It belongs with the robotics & motion, iot & wireless and sensors designs in this gallery.
From the project
A line follower robot i built from scratch, schematic, PCB, and all. it uses an 8 channel sensor array to track the line and a PID loop to stay on it and handle sharp turns without freaking out. also has bluetooth built in so i could tune the PID values live instead of reuploading code every time.
This is my competition line follower. Our team won first place in the seniors line follower category at TechnoXian Egypt and qualified for the World Cup in Malaysia. I worked on the custom PCB, mechanical design, assembly, and tuning.
I wanted to understand PID control properly, so I researched existing line followers and built my own version around an Arduino Pro Mini and a QTR-8RC sensor array.

Main components on the Line follower-Bot
Line follower-Bot bill of materials (BOM)
15 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8835DSSR | DIP-14_W10.16mm | U1 |
| 1 | HC-05 | MODULE_ZC142200 | U2 |
| 1 | Arduino_Mini_01_Socket | Arduino_Mini_Socket | A1 |
| 2 | Motor Connector | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | M1, M2 |
| 1 | S7V7F5 | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Battery Connector (7.4V) | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | QTR-8RC Line Sensor | PinHeader_1x11_P2.54mm_Vertical | J3 |
| 2 | Button | SW_PUSH_6mm_H4.3mm | B1, B2 |
| 1 | Switch | SW_MINI-SPDT-SW | S1 |
| 4 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
Line follower-Bot design files
The KiCad project lives in the ZIZO932/Line-follower-Bot repository on GitHub; these links point at the commit this page was built from.
Line follower-Bot: common questions
What microcontroller does the Line follower-Bot use?
The Line follower-Bot is built around the Arduino_Mini_01_Socket, from the AVR/Arduino family.
How big is the Line follower-Bot PCB?
The Line follower-Bot measures 150 × 47 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Line follower-Bot?
15 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Line follower-Bot design files?
From the ZIZO932/Line-follower-Bot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Line follower-Bot design in my own project?
The repository has no license, so all rights stay with ZIZO932. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Line follower-Bot without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k