3 open source boards using the DRV8835DSSR
Real designs built with the DRV8835DSSR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Line follower-Bot
ZIZO932
150 × 47 mm15 parts2LNo license2RP2040/RP2350
DeltaRho
valleyquail
68 × 75 mm114 parts4LNo license1FlySensei Stack RPi
denjos007
90 × 65 mm104 parts4LNo license0
The DRV8835DSSR in open source designs
The gallery holds 3 open source boards using the DRV8835DSSR from 3 GitHub repositories; a typical one measures about 90 × 65 mm and carries around 104 components.
67% use four copper layers or more, and 0% carry an open source license.
The most starred is Line follower-Bot by ZIZO932.
Microcontrollers on boards using the DRV8835DSSR
What boards using the DRV8835DSSR are built for
DRV8835DSSR: common questions
Where can I find a DRV8835DSSR reference design?
Each of the 3 boards on this page is a real design using the DRV8835DSSR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DRV8835DSSR use?
Most are built on AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the DRV8835DSSR?
The median is 90 × 65 mm, and 33% are two-layer designs.
What is the most popular open source board using the DRV8835DSSR?
By GitHub stars, Line follower-Bot by ZIZO932, with 2 stars.
Can I simulate one of these boards using the DRV8835DSSR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.