Voltmeter
zizofr·voltmeter_PCB
About the Voltmeter PCB
Voltmeter is an open source AVR/Arduino PCB design by zizofr, published on GitHub. It is a 2-layer board measuring 60 × 80 mm, with 28 components from 20 distinct parts.
Its main chip is the ATmega328P-P, from the AVR/Arduino family. Other key parts include the L7805. By type, the board carries 7 capacitors, 5 resistors, 4 connectors, 4 diodes, 2 ICs and 1 crystal.
From the project
a home made PCB of a digital voltmeter, embedded with a firmware to measure the electric tension
A compact digital voltmeter designed around a custom Printed Circuit Board (PCB) created in KiCad. This repository contains the complete hardware design files, schematics, Gerber manufacturing outputs, and board renders prior to final firmware integration.
- EDA Tool: KiCad - Board Architecture: Custom 2-layer PCB - Hardware Features: - Dedicated analog front-end voltage divider circuit for signal attenuation. - Onboard microcontroller interface for ADC sampling and processing. - Display interface output. - Optimized trace routing with solid ground plane shielding. - Manufacturing Package…
Main components on the Voltmeter
Voltmeter bill of materials (BOM)
28 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega328P-P | DIP-28_W7.62mm | U1 |
| 1 | L7805 | TO-220-3_Vertical | U2 |
| 1 | 16MHz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | Barrel_Jack | BarrelJack_Horizontal | J2 |
| 2 | Conn_01x01 | Banana_Jack_1Pin | J3, J4 |
| 1 | 100mA | Fuse_1206_3216Metric | F1 |
| 1 | LCD-016N002L | PinHeader_1x16_P2.54mm_Vertical | LCD1 |
| 1 | 10k | Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | SW_SPST | SW_SPST_Omron_B3F-40xx | SW1 |
| 1 | LED | LED_D5.0mm | LED1 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 1 | 5.1V | D_DO-35_SOD27_P7.62mm_Horizontal | D3 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D4 |
| 2 | 22pF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 4 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C5, C7, C8 |
| 1 | 10µF | CP_Radial_D5.0mm_P2.00mm | C6 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R4 |
| 2 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R5 |
| 1 | 30k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
Voltmeter design files
The KiCad project lives in the zizofr/voltmeter_PCB repository on GitHub; these links point at the commit this page was built from.
- Layoutvoltmeter.kicad_pcb
- Schematicvoltmeter.kicad_sch
Voltmeter: common questions
What microcontroller does the Voltmeter use?
The Voltmeter is built around the ATmega328P-P, from the AVR/Arduino family.
How big is the Voltmeter PCB?
The Voltmeter measures 60 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Voltmeter?
28 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Voltmeter design files?
From the zizofr/voltmeter_PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Voltmeter design in my own project?
The repository has no license, so all rights stay with zizofr. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Voltmeter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k