Devboard
zPirroZ3007·devboard
About the Devboard PCB
Devboard is an open source STM32 PCB design by zPirroZ3007, published on GitHub. It is a 2-layer board measuring 23 × 52 mm, with 24 components from 17 distinct parts.
Its main chip is the STM32F411CEU6, from the STM32 family. Other key parts include the AP2120N-3.3TRG1 and USBLC6-2SC6Y. By type, the board carries 10 capacitors, 5 resistors, 3 ICs, 3 connectors, 1 fuse and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Breadboard-friendly STM32F411 development board with USB-C support.
This is my first serious PCB designed for manufacturing. It's a microcontroller development board based on the STM32F411CEU6.
- [x] Learn basics of schematic organization - [x] Learn basics of PCB routing and component placement - [x] Get familiar with PCBWay and Chinese manufacturing - [x] Achieve plug-and-play support in Arduino IDE via USB-C - [x] Small form factor, breadboard-friendly

Main components on the Devboard
Devboard bill of materials (BOM)
24 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F411CEU6 | QFN50P700X700X60-49N-D | U1 |
| 1 | AP2120N-3.3TRG1 | SOT96P240X105-3N | U2 |
| 1 | USBLC6-2SC6Y | SOT95P280X145-6N | U3 |
| 1 | USB4105-GF-A | GCT_USB4105-GF-A | J1 |
| 2 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2, J3 |
| 1 | 500 mA | Fuse_0603_1608Metric | F2 |
| 1 | B3SN-3012P | B3SN3012P | S1 |
| 1 | LED | LED_0603_1608Metric | D2 |
| 1 | 10 uF | C_0402_1005Metric | C1 |
| 5 | 100 nF | C_0402_1005Metric | C2, C3, C4, C5, C9 |
| 2 | 1 uF | C_0603_1608Metric | C6, C7 |
| 1 | 100 nF | C_0603_1608Metric | C8 |
| 1 | 1 uF | C_0402_1005Metric | C10 |
| 1 | 5.1k | R_0603_1608Metric | R1 |
| 1 | 5.1k Ω | R_0603_1608Metric | R2 |
| 1 | 100k Ω | R_0603_1608Metric | R3 |
| 2 | 10k Ω | R_0603_1608Metric | R4, R5 |
Devboard design files
The KiCad project lives in the zPirroZ3007/devboard repository on GitHub; these links point at the commit this page was built from.
- Layoutdevboard.kicad_pcb
- Schematicdevboard.kicad_sch
Devboard: common questions
What microcontroller does the Devboard use?
The Devboard is built around the STM32F411CEU6, from the STM32 family.
How big is the Devboard PCB?
The Devboard measures 23 × 52 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Devboard?
24 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Devboard design files?
From the zPirroZ3007/devboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Devboard design in my own project?
The repository has no license, so all rights stay with zPirroZ3007. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Devboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k