JukeboxPanelTwoBoards
zutroy97·jukebox5·hardware/JukeboxPanelTwoBoards/JukeboxPanelTwoBoards.kicad_pcb
About the JukeboxPanelTwoBoards PCB
JukeboxPanelTwoBoards is an open source Raspberry Pi PCB design by zutroy97, published on GitHub. It is a 2-layer board measuring 156 × 72 mm, with 29 components from 12 distinct parts.
Its main chip is the Raspberry_Pi_2_3, from the Raspberry Pi family. Other key parts include the Quad Alphanumeric. By type, the board carries 12 connectors, 5 modules, 4 resistors and 2 capacitors.
It belongs with the displays & leds designs in this gallery.
From the project
Upgrading an actual, old jukebox with Apple Music/Airplay.
My step-father bought a 1970s-era jukebox that, from what we can tell, spent a number of years in service at a Waffle House. We cleaned it up and gutted its electromechanical guts, original lighting, and speakers, replacing them with an early-90s Sony receiver, 6x9 car speakers, a powered subwoofer, and a Raspberry Pi running the fantastic shairport-sync. The jukebox is now an AirPlay speaker, reachable from any iPhone or Mac on the network.
Main components on the JukeboxPanelTwoBoards
JukeboxPanelTwoBoards bill of materials (BOM)
29 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | Quad Alphanumeric | Adafruit_1911_QuadAlphaNum | A6, A7, A8, A9, A10 |
| 1 | Raspberry_Pi_2_3 | IDC-Header_2x20_P2.54mm_Horizontal | J1 |
| 1 | Jukebox Panel | DIP-10_W7.62mm_Socket | J2 |
| 2 | +3.3V | PinHeader_1x03_P2.54mm_Vertical | J3, J8 |
| 2 | +5V | PinHeader_1x03_P2.54mm_Vertical | J4, J9 |
| 2 | GND | PinHeader_1x03_P2.54mm_Vertical | J5, J6 |
| 1 | Display Header | PinHeader_1x05_P2.54mm_Vertical | J7 |
| 3 | 8P8C | RJ45_Ninigi_GE | J10, J11, J12 |
| 6 | TestPoint | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP_+5V1, TP_+5V2, TP_+5V3, TP_GND2, TP_GND3, TP_GND4 |
| 2 | 100uF | CP_Radial_D4.0mm_P2.00mm | C1, C2 |
| 2 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1, R3 |
| 2 | 18k | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R2, R4 |
JukeboxPanelTwoBoards design files
The KiCad project lives in the zutroy97/jukebox5 repository on GitHub; these links point at the commit this page was built from.
JukeboxPanelTwoBoards: common questions
What microcontroller does the JukeboxPanelTwoBoards use?
The JukeboxPanelTwoBoards is built around the Raspberry_Pi_2_3, from the Raspberry Pi family.
How big is the JukeboxPanelTwoBoards PCB?
The JukeboxPanelTwoBoards measures 156 × 72 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the JukeboxPanelTwoBoards?
29 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the JukeboxPanelTwoBoards design files?
From the zutroy97/jukebox5 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the JukeboxPanelTwoBoards design in my own project?
The repository has no license, so all rights stay with zutroy97. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the JukeboxPanelTwoBoards without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in jukebox5
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507