HardLabs

PicoLEDs

zygurt·MIDI-Wind-Controller·pcb/PicoLEDs/PicoLEDs.kicad_pcb

PicoLEDs PCB layout, top view — open source board by zygurt

About the PicoLEDs PCB

PicoLEDs is an open source PCB design by zygurt, published on GitHub under the MIT license. It is a 2-layer board measuring 55.5 × 59.5 mm, with 34 components from 5 distinct parts.

By type, the board carries 15 capacitors, 14 diodes, 3 connectors and 2 resistors.

It belongs with the audio designs in this gallery.

From the project

- 3D designs contains dxf and svg files. Basic design was done in Fusion 360 and then exported. - Datasheets contains datasheets. Woah. - src contains source code for doppler and Arduino Leonardo implementations, as well as the board schematic. Currently midi messages are sent ov

- 3D designs contains dxf and svg files. Basic design was done in Fusion 360 and then exported. - Datasheets contains datasheets. Woah. - src contains source code for doppler and Arduino Leonardo implementations, as well as the board schematic. Currently midi messages are sent over USB, and shows the midi note number in binary on the LED grid on the doppler board.

PicoLEDs, from the project README
From the project README

PicoLEDs bill of materials (BOM)

34 components, 5 distinct parts.

QtyPartRefs
1
Conn_01x02
J1
2
Conn_01x01_Pin
J2, J3
14
19-C47/RSGHBHC-5V01/2T
D1, D2, D3, D4, D5, D6, D7, D8 +6
15
0.1uF
C0, C1, C2, C3, C4, C5, C6, C7 +7
2
10K
R1, R2

PicoLEDs design files

The KiCad project lives in the zygurt/MIDI-Wind-Controller repository on GitHub; these links point at the commit this page was built from.

PicoLEDs: common questions

How big is the PicoLEDs PCB?

The PicoLEDs measures 55.5 × 59.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PicoLEDs?

34 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the PicoLEDs design files?

From the zygurt/MIDI-Wind-Controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PicoLEDs design in my own project?

Yes, under the terms of its MIT license, which zygurt chose for the repository.

More boards in MIDI-Wind-Controller

Similar boards