HardLabs

Arduino-Pro-Mini

zymaxcii·sketch·cad/Arduino-Pro-Mini/Arduino-Pro-Mini.kicad_pcb

Arduino-Pro-Mini PCB layout, top view — open source AVR/Arduino board by zymaxcii

About the Arduino-Pro-Mini PCB

Arduino-Pro-Mini is an open source AVR/Arduino PCB design by zymaxcii, published on GitHub. It is a 2-layer board measuring 17.8 × 33 mm, with 24 components from 20 distinct parts.

Its main chip is the 8/16/20MHz, from the AVR/Arduino family. Other key parts include the 863-NCP7805TG and MIC5205. By type, the board carries 6 capacitors, 5 jumpers, 5 resistors, 2 ICs, 1 transistor and 1 switch.

From the project

My arduino playground

Arduino Pro Mini 328 ====================

SparkFun's Arduino Pro Mini 328 is a bare bones super small Arduino compatible development board. This hardware is used for both the 3.3V/8MHz and the 5V/16MHz versions.

Both of these products use the same PCB, but are populated with unique voltage regulators and resonators.

Repository Contents ------------------- /Documentation - SVG and PDF datasheets for the Pro Mini /Hardware - Eagle design files (Schematic and Board) /Production** - Test bed files and production panel files

Arduino-Pro-Mini, from the project README
From the project README

Main components on the Arduino-Pro-Mini

863-NCP7805TGMIC5205

Arduino-Pro-Mini bill of materials (BOM)

24 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
863-NCP7805TG
ATMEGA328
U1
1
MIC5205
U2
1
8/16/20MHz
Q1
1
FRAME-LETTER
FRAME1
1
FTDI Basic
JP1
2
—
JP2, JP3
2
—
JP6, JP7
1
Reset
S1
1
—
SJ1
1
Red
LED1
1
Green
D3
2
667-ECA-1EM101
0.1uF
C1, C2
1
594-CN15A220J
0.1uF
C3
1
0.1uF
C10
2
10uF
C13, C19
1
603-MFR-25FBF52-470R
R1
1
603-MFR-25FBF52-10K
10K
R2
1
—
R3
1
330
R6
1
10K
R11

Arduino-Pro-Mini design files

The KiCad project lives in the zymaxcii/sketch repository on GitHub; these links point at the commit this page was built from.

Arduino-Pro-Mini: common questions

What microcontroller does the Arduino-Pro-Mini use?

The Arduino-Pro-Mini is built around the 8/16/20MHz, from the AVR/Arduino family.

How big is the Arduino-Pro-Mini PCB?

The Arduino-Pro-Mini measures 17.8 × 33 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arduino-Pro-Mini?

24 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Arduino-Pro-Mini design files?

From the zymaxcii/sketch repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Arduino-Pro-Mini design in my own project?

The repository has no license, so all rights stay with zymaxcii. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Arduino-Pro-Mini without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in sketch

Similar boards