10 open source boards using the MIC5205
Real designs built with the MIC5205, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
BGeigieIntegrated
IRNAS
66.8 × 104.8 mm86 parts2LCustom license6AVR/Arduino
Cosmoneer-Proto
cosmospioneering
70 × 50 mm71 parts4LNo license5AVR/Arduino
RedBoard Edge
sparkfunX
101.6 × 38.1 mm49 parts2LNo license0AVR/Arduino
Oc DevKit2
SuperMechaCow
35 × 43 mm39 parts2LMIT20Combined
berryelectronics
64.8 × 43.5 mm21 parts2LNo license7AVR/Arduino
RedBoard Edge Panel
sparkfunX
101.6 × 38.1 mm48 parts2LNo license0ReST RRD-FGC-Adapter
berryelectronics
28.8 × 43.5 mm18 parts2LNo license7AVR/Arduino
RedBoard Edge Panel
sparkfun
101.6 × 38.1 mm48 parts2LMIT1AVR/Arduino
Arduino-Pro-Mini
zymaxcii
17.8 × 33 mm24 parts2LNo license1ReST SD-Module
berryelectronics
33 × 40 mm7 parts2LNo license7
How designs wire the MIC5205
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MIC5205 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 5 has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 10 µF).
- Pin 2 is tied to GND on 7 of 7 designs.
- Pin 4 is left unconnected on 6 of 7 designs.
- Pin 5 is tied to 3.3V on 6 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 5V 57% · a signal 43% |
|
| Pin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: 5V 71% · a signal 29% |
|
| Pin 4 | Connected to: Not connected 86% | — |
| Pin 5 | Connected to: 3.3V 86% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Oc DevKit2 by SuperMechaCow, Combined by berryelectronics, BGeigieIntegrated by IRNAS and Cosmoneer-Proto by cosmospioneering.
The MIC5205 in open source designs
The gallery holds 10 open source boards using the MIC5205 from 7 GitHub repositories; a typical one measures about 65.8 × 41.5 mm and carries around 44 components.
90% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Oc DevKit2 by SuperMechaCow.
Parts used alongside the MIC5205
Microcontrollers on boards using the MIC5205
What boards using the MIC5205 are built for
MIC5205: common questions
Where can I find a MIC5205 reference design?
Each of the 10 boards on this page is a real design using the MIC5205. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MIC5205 pin 5?
Pin 5 has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the MIC5205.
How is the MIC5205 pin 2 connected?
Pin 2 is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the MIC5205.
How is the MIC5205 pin 4 connected?
Pin 4 is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the MIC5205.
What parts are used alongside the MIC5205?
The ATMEGA328P_TQFP, CH340G, LM1117 and Standoff_Grounding appear in the most repositories here.
Which microcontrollers do boards using the MIC5205 use?
Most are built on AVR/Arduino (6).
How big is a typical board using the MIC5205?
The median is 65.8 × 41.5 mm, and 90% are two-layer designs.
What is the most popular open source board using the MIC5205?
By GitHub stars, Oc DevKit2 by SuperMechaCow, with 20 stars.
Can I simulate one of these boards using the MIC5205 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.