Stm32f4-eval
zzakiullah·stm32f4-eval
About the Stm32f4-eval PCB
Stm32f4-eval is an open source STM32 PCB design by zzakiullah, published on GitHub. It is a 4-layer board measuring 112.2 × 62.3 mm, with 54 components from 37 distinct parts.
Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the MP2359DJ-LF-Z and USBLC6-2SC6. By type, the board carries 18 resistors, 17 capacitors, 5 connectors, 4 diodes, 3 ICs and 3 inductors.
Main components on the Stm32f4-eval
Stm32f4-eval bill of materials (BOM)
54 components, 37 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F405RGT6 | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | MP2359DJ-LF-Z | SOT-23-6 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J1 |
| 1 | SWD | PinSocket_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | I2C | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J3 |
| 1 | UART | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J4 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J5 |
| 1 | 250mA | Fuse_1206_3216Metric | F1 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | BLUE | D_0603_1608Metric | D1 |
| 2 | B5819W | D_SOD-123 | D2, D3 |
| 1 | RED | D_0603_1608Metric | D4 |
| 1 | 600 @ 600MHz | L_0805_2012Metric | FB1 |
| 1 | 39n | L_0402_1005Metric | L1 |
| 1 | 10u | L_Sunlord_MWSA0518S | L2 |
| 2 | 2u2 | C_0603_1608Metric | C1, C2 |
| 1 | 4u7 | C_0603_1608Metric | C3 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 100n | C_0402_1005Metric | C4, C5, C6, C7, C8, C17 |
| 1 | 1u | C_0402_1005Metric | C9 |
| 1 | 10n | C_0402_1005Metric | C10 |
| 2 | 12p | C_0402_1005Metric | C11, C12 |
| 3 | 10u | C_1206_3216Metric | C13, C15, C16 |
| 1 | 10n | C_0603_1608Metric | C14 |
| 1 | 10k | R_0402_1005Metric | R1 |
| 1 | 47 | R_0402_1005Metric | R2 |
| 1 | 1k5 | R_0603_1608Metric | R3 |
| 1 | 100k | R_0603_1608Metric | R4 |
| 1 | 68k | R_0603_1608Metric | R5 |
| 1 | 47k | R_0603_1608Metric | R6 |
| 1 | 15k | R_0603_1608Metric | R7 |
| 1 | 270 | R_0603_1608Metric | R8 |
| 7 | 22 | R_0402_1005Metric | R9, R10, R11, R14, R15, R16, R17 |
| 2 | 2k2 | R_0402_1005Metric | R12, R13 |
| 1 | 1k | R_0603_1608Metric | R18 |
Stm32f4-eval design files
The KiCad project lives in the zzakiullah/stm32f4-eval repository on GitHub; these links point at the commit this page was built from.
Stm32f4-eval: common questions
What microcontroller does the Stm32f4-eval use?
The Stm32f4-eval is built around the STM32F405RGT6, from the STM32 family.
How big is the Stm32f4-eval PCB?
The Stm32f4-eval measures 112.2 × 62.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Stm32f4-eval?
54 components, from 37 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stm32f4-eval design files?
From the zzakiullah/stm32f4-eval repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stm32f4-eval design in my own project?
The repository has no license, so all rights stay with zzakiullah. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm32f4-eval without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k