Studysphere

0xfrq·studysphere·hardware/studysphere.kicad_pcb

Studysphere PCB layout, top view — open source ESP32 board by 0xfrq

About the Studysphere PCB

Studysphere is an open source ESP32 PCB design by 0xfrq, published on GitHub. It is a 2-layer board measuring 102 × 62 mm, with 20 components from 13 distinct parts.

Its main chip is the ESP32-DEVKITC-V4, from the ESP32 family. By type, the board carries 8 resistors, 5 connectors, 3 capacitors, 2 transistors, 1 IC and 1 diode.

It belongs with the iot & wireless designs in this gallery.

From the project

Node IoT berbasis ESP32 untuk ruang belajar pintar. Node membaca suhu, kelembapan, cahaya, kualitas udara dan kehadiran orang, menyalakan lampu belajar secara otomatis, menampilkan status di LCD, dan berkomunikasi dengan aplikasi desktop lewat MQTT. Aplikasi desktop (Tauri, Windo

Node IoT berbasis ESP32 untuk ruang belajar pintar. Node membaca suhu, kelembapan, cahaya, kualitas udara dan kehadiran orang, menyalakan lampu belajar secara otomatis, menampilkan status di LCD, dan berkomunikasi dengan aplikasi desktop lewat MQTT. Aplikasi desktop (Tauri, Windows dan Linux) ada di desktop/ dan sekaligus menjadi broker MQTT di laptop, jadi sistemnya berdiri sendiri tanpa internet. LLM lokal dikerjakan terpisah dan memakai kontrak MQTT di bawah.

Main components on the Studysphere

Studysphere bill of materials (BOM)

20 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-DEVKITC-V4
ESP32-DevKitC-V4
U1
2
BSS138
Q1, Q2
1
DHT11
J1
1
HC-SR501
J2
1
Modul LDR
J3
1
MQ-135
J4
1
LCD 16x2 I2C
J5
1
LED kuning
D1
1
100u 16V
C1
2
100N
100n
C2, C3
6
10K
10k
R1, R2, R4, R5, R6, R7
1
15K
15k
R3
1
220
R8

Studysphere design files

The KiCad project lives in the 0xfrq/studysphere repository on GitHub; these links point at the commit this page was built from.

Studysphere: common questions

What microcontroller does the Studysphere use?

The Studysphere is built around the ESP32-DEVKITC-V4, from the ESP32 family.

How big is the Studysphere PCB?

The Studysphere measures 102 × 62 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Studysphere?

20 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Studysphere design files?

From the 0xfrq/studysphere repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Studysphere design in my own project?

The repository has no license, so all rights stay with 0xfrq. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Studysphere without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards