13 open source boards using the ESP32-DevKitC V4

Real designs built with the ESP32-DevKitC V4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the ESP32-DevKitC V4

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the ESP32-DevKitC V4 connects to, and the resistors, capacitors and other passives placed on it.

  • The SD2 pin is left unconnected on 8 of 8 designs.
  • The SD3 pin is left unconnected on 8 of 8 designs.
  • The CMD pin is left unconnected on 8 of 8 designs.
  • The 3V3 pin is tied to 3.3V on 7 of 8 designs.
3V3pin 1Connected to: 3.3V 88%
ENpin 2Connected to: Not connected 75%
SENSOR_VPpin 3Connected to: Not connected 63% · a signal 25%
SENSOR_VNpin 4Connected to: Not connected 75% · a signal 25%
IO35pin 6Connected to: Signal 75% · not connected 25%
  • Resistor to GND on 50% · 15 kΩ (2), 100 kΩ (1)
  • Series resistor on 50% · 10 kΩ (2), 390 kΩ (1)
IO25pin 9Connected to: Signal 75% · not connected 25%
  • Series resistor on 38% · 33 kΩ (1), 100 Ω (1)
  • Resistor to GND on 38% · 10 kΩ (2)
IO26pin 10Connected to: Signal 63% · not connected 38%
  • Series resistor on 38% · 33 kΩ (1), 1 kΩ (1)
GND1pin 14Connected to: GND 100%
IO13pin 15Connected to: Signal 63% · not connected 38%
  • Series resistor on 50% · 220 Ω (2), 1 kΩ (1)
SD2pin 16Connected to: Not connected 100%
SD3pin 17Connected to: Not connected 100%
CMDpin 18Connected to: Not connected 100%
EXT_5Vpin 19Connected to: 5V 63% · a signal 25%
GND_J3_1_20pin 20Connected to: GND 71% · not connected 29%
TXD0_23pin 23Connected to: Not connected 71% · a signal 29%
RXD0_24pin 24Connected to: Not connected 71% · a signal 29%
GND_J3_7_26pin 26Connected to: GND 86%
IO0_33pin 33Connected to: Not connected 71% · a signal 29%
IO2_34pin 34Connected to: Not connected 71% · a signal 29%
IO15_35pin 35Connected to: Not connected 71% · a signal 29%
SD1_36pin 36Connected to: Not connected 86%
SD0_37pin 37Connected to: Not connected 86%
CLK_38pin 38Connected to: Not connected 86%

15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Luxigrid by overscore-media, Multirotor ros by adnksharp, Nixie-Clock: Controller by konradmoesch and Studysphere by 0xfrq.

The ESP32-DevKitC V4 in open source designs

The gallery holds 13 open source boards using the ESP32-DevKitC V4 from 11 GitHub repositories; a typical one measures about 102 × 77 mm and carries around 27 components.

91% are two-layer designs, the rest use four layers or more, and 46% carry an open source license.

The most starred is Luxigrid by overscore-media.

Microcontrollers on boards using the ESP32-DevKitC V4

ESP32-DevKitC V4: common questions

Where can I find a ESP32-DevKitC V4 reference design?

Each of the 13 boards on this page is a real design using the ESP32-DevKitC V4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-DevKitC V4 SD2 pin connected?

The SD2 pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the ESP32-DevKitC V4.

How is the ESP32-DevKitC V4 SD3 pin connected?

The SD3 pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the ESP32-DevKitC V4.

How is the ESP32-DevKitC V4 CMD pin connected?

The CMD pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the ESP32-DevKitC V4.

Which microcontrollers do boards using the ESP32-DevKitC V4 use?

Most are built on ESP32 (13).

How big is a typical board using the ESP32-DevKitC V4?

The median is 102 × 77 mm, and 91% are two-layer designs.

What is the most popular open source board using the ESP32-DevKitC V4?

By GitHub stars, Luxigrid by overscore-media, with 5 stars.

Can I simulate one of these boards using the ESP32-DevKitC V4 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part