Mcu board samd51
1ln·mcu-board-samd51
About the Mcu board samd51
Mcu board samd51 is an open source Microchip SAM PCB design by 1ln, published on GitHub. It is a 2-layer board measuring 56.5 × 65.5 mm, with 44 components from 21 distinct parts.
Its main chip is the samd51p20, from the Microchip SAM family. Other key parts include the LM1117-3.3. By type, the board carries 20 capacitors, 9 connectors, 7 resistors, 4 diodes, 2 ICs and 1 crystal.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A samd51p20 development board, designed in kicad
This board is currently is testing phase, use at your own risk.
This board is designed as a testing platform for the cortex m4 samd51p20
Most pins broken out Board can be attached to a raspberry pi 3 (board only, not pin header compatible) Micro Sdcard slot Micro usb available, 5v only
Main components on the Mcu board samd51
Mcu board samd51 bill of materials (BOM)
44 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | samd51p20 | TQFP-128_14x14mm_P0.4mm | U1 |
| 1 | LM1117-3.3 | SOT-223 | U5 |
| 1 | Crystal | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | Micro_SD_Card_Det | microSD_HC_Hirose_DM3D-SF | J1 |
| 2 | Conn_02x08_Counter_Clockwise | PinHeader_2x08_P2.54mm_Vertical | J2, J5 |
| 1 | Conn_02x16_Odd_Even | PinHeader_2x16_P2.54mm_Vertical | J3 |
| 1 | 3.3v | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | VCC | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Conn_02x05_Counter_Clockwise | PinHeader_2x05_P1.27mm_Vertical | J67 |
| 1 | TXRX | PinHeader_1x03_P2.54mm_Vertical | J70 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J74 |
| 1 | Reset | SW_SPST_EVPBF | SW1 |
| 1 | LED_ARGB | LED_RGB_5050-6 | D1 |
| 3 | LED_Small | LED_0603_1608Metric | D2, D3, D6 |
| 17 | C_Small | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C11 +9 |
| 1 | C0.1uf | C_0603_1608Metric | C8 |
| 1 | 10uf | CP_Elec_4x5.3 | C9 |
| 1 | 10uf | CP_Elec_4x4.5 | C10 |
| 2 | R330 | R_0603_1608Metric | R1, R3 |
| 4 | R1K | R_0603_1608Metric | R2, R4, R5, R13 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R10K | R_0603_1608Metric | R6 |
Mcu board samd51 design files
The KiCad project lives in the 1ln/mcu-board-samd51 repository on GitHub; these links point at the commit this page was built from.
- Layoutelectrosprawl.kicad_pcb
Mcu board samd51: common questions
What microcontroller does the Mcu board samd51 use?
The Mcu board samd51 is built around the samd51p20, from the Microchip SAM family.
How big is the Mcu board samd51?
The Mcu board samd51 measures 56.5 × 65.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mcu board samd51?
44 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mcu board samd51 design files?
From the 1ln/mcu-board-samd51 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Mcu board samd51 design in my own project?
The repository has no license, so all rights stay with 1ln. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mcu board samd51 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416