HardLabs

Camera-Switching-Macropad

3aks·Camera-Switching-Macropad·PCB/MyPCB.kicad_pcb

Camera-Switching-Macropad PCB layout, top view — open source RP2040/RP2350 board by 3aks

About the Camera-Switching-Macropad PCB

Camera-Switching-Macropad is an open source RP2040/RP2350 PCB design by 3aks, published on GitHub under the MIT license. It is a 2-layer board measuring 82.4 × 43.4 mm, with 10 components from 4 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 4 switches, 4 diodes, 1 IC and 1 connector.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

My first project for hack club

https://github.com/gorbachev/KiCad-SSD1306-0.91-OLED-4pin-128x32.pretty/tree/master

https://github.com/Seeed-Studio/OPLKicadLibrary

Main components on the Camera-Switching-Macropad

XIAO-RP2040-DIP

Camera-Switching-Macropad bill of materials (BOM)

10 components, 4 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
1
OLED_DISPLAY
J1
4
SW_Push
SW1, SW2, SW3, SW4
4
SK6812MINI
D1, D2, D3, D4

Camera-Switching-Macropad design files

The KiCad project lives in the 3aks/Camera-Switching-Macropad repository on GitHub; these links point at the commit this page was built from.

Camera-Switching-Macropad: common questions

What microcontroller does the Camera-Switching-Macropad use?

The Camera-Switching-Macropad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Camera-Switching-Macropad PCB?

The Camera-Switching-Macropad measures 82.4 × 43.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Camera-Switching-Macropad?

10 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Camera-Switching-Macropad design files?

From the 3aks/Camera-Switching-Macropad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Camera-Switching-Macropad design in my own project?

Yes, under the terms of its MIT license, which 3aks chose for the repository.

Can I test firmware for the Camera-Switching-Macropad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards