KiCad-Simulation
46nori·KiCad-Simulation·AudioMixer/AudioMixer.kicad_sch
About the KiCad-Simulation PCB
KiCad-Simulation is an open source PCB design by 46nori, published on GitHub. It is a board, with 44 components from 11 distinct parts.
Other key parts include the NJM4580. By type, the board carries 20 resistors, 12 capacitors, 4 ICs and 4 diodes.
It belongs with the audio designs in this gallery.
From the project
KiCadによる電子回路のシミュレーション結果置き場
以下の構成でFM音源のオーディオ出力をミキシングしてLINE OUTで出力する。 - 加算回路 - LPF - 減衰アンプ - バッファ
$$ \begin{align} fc &= \frac{1}{2 \pi R1 \sqrt{C1C2}} \\ R1 &= R2 \\ C1 &= 2 C2 \end{align} $$
カットオフ周波数 $fc$ は可聴帯域である20KHz程度とするため、定数は以下とした。 $R1=5.1k\Omega, C1=1000pF, C2=2200pF \rightarrow f_c \approx 21KHz $
NJM4580を±12V電源で使用しているので、ミキシング後の最大振幅はシミュレーション結果から±10.5V程度。LINE OUTの信号レベル±2V RMSまで減衰させる必要がある。
Main components on the KiCad-Simulation
KiCad-Simulation bill of materials (BOM)
44 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | NJM4580 | U1, U2, U3, U4 | |
| 1 | VSIN | V1 | |
| 1 | 5 | V2 | |
| 1 | -12 | V3 | |
| 1 | 12 | V4 | |
| 4 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4 |
| 11 | ${SIM.PARAMS} | C1, C2, C3, C4, C5, C6, C7, C8 +3 | |
| 1 | 100u | C10 | |
| 18 | ${SIM.PARAMS} | R1, R2, R3, R4, R5, R6, R7, R8 +10 | |
| 1 | 1 | R12 | |
| 1 | 47 | R18 |
KiCad-Simulation design files
The KiCad project lives in the 46nori/KiCad-Simulation repository on GitHub; these links point at the commit this page was built from.
- SchematicAudioMixer/AudioMixer.kicad_sch
KiCad-Simulation: common questions
How many components are on the KiCad-Simulation?
44 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the KiCad-Simulation design files?
From the 46nori/KiCad-Simulation repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the KiCad-Simulation design in my own project?
The repository has no license, so all rights stay with 46nori. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687