Battery pico
4f48·battery-pico·pcb/battery-pico.kicad_pcb
About the Battery pico PCB
Battery pico is an open source PCB design by 4f48, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 21 × 15.4 mm, with 12 components from 9 distinct parts.
Other key parts include the MCP73831T-2ACI/OT. By type, the board carries 3 connectors, 3 resistors, 2 transistors, 2 capacitors, 1 IC and 1 diode.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
A battery charger add-on board for all Raspberry Pi Pico development boards.
A Lithium-Polymer battery charger add-on board for all Raspberry Pi Pico development boards. It features 250 mA charging with power-path management and a JST PH battery connector, all while only spanning the first 6 rows of pins. The board has castellated pads and screw mounting, just like the Pico, so you can even use it standalone.
- MCP73831 charger IC configured for 250 mA charging current - Orange charging indicator LED - Back-to-back PMOS load switch for power-path management - JSH PH battery connector - Raspberry Pi Pico-compatible castellated pads and screw holes

Main components on the Battery pico
Battery pico bill of materials (BOM)
12 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831T-2ACI/OT MCP73831-2-OT | SOT-23-5 | U1 |
| 2 | AO3401A | SOT-23 | Q1, Q2 |
| 2 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical_Castellated | J1, J2 |
| 1 | S2B-PH-K-S (LF)(SN) Conn_01x02 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | LTST-C190KFKT ORANGE | LED_0603_1608Metric | D1 |
| 2 | GRM188Z71C475KE21D 4.7u | C_0603_1608Metric | C1, C2 |
| 1 | CRCW06033K90FKTABC 3.9k | R_0603_1608Metric | R1 |
| 1 | CRCW0603100KFKEA 100k | R_0603_1608Metric | R2 |
| 1 | RC0603FR-071K5L 1.5k | R_0603_1608Metric | R3 |
Battery pico design files
The KiCad project lives in the 4f48/battery-pico repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/battery-pico.kicad_pcb
- Schematicpcb/battery-pico.kicad_sch
- BOMbom.csv
Battery pico: common questions
How big is the Battery pico PCB?
The Battery pico measures 21 × 15.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Battery pico?
12 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Battery pico design files?
From the 4f48/battery-pico repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Battery pico design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which 4f48 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k