Smart switch pcb esp32
4mrit·smart-switch-pcb-esp32
About the Smart switch pcb esp32
Smart switch pcb esp32 is an open source ESP32 PCB design by 4mrit, published on GitHub. It is a 2-layer board measuring 44.8 × 48 mm, with 10 components from 9 distinct parts.
Its main chip is the ESP32_DEVKIT_V1, from the ESP32 family. By type, the board carries 3 connectors, 2 resistors, 1 IC, 1 transistor, 1 relay and 1 diode.
From the project
This repository contains the KiCad project files for the PCB design of the Smart Bell system using the ESP32 microcontroller. It includes schematic diagrams, PCB layout files, custom libraries, and project settings.
This repository contains the KiCad project files for the PCB design of the Smart Bell system using the ESP32 microcontroller. It includes schematic diagrams, PCB layout files, custom libraries, and project settings.
- /: Root directory containing this README.md and other documentation. - /: Contains KiCad project files for the ESP32 PCB design. - *.kicadsch: Schematic files for the PCB design. - .kicadpcb: PCB layout files. - .kicadpro: Project settings and metadata. - /KICADLIBRARIES/: Custom libraries and components used in the design. - /custom/: Additional custom components. - README.md…
Main components on the Smart switch pcb esp32
Smart switch pcb esp32 bill of materials (BOM)
10 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32_DEVKIT_V1 | ESP32_DEVKIT_V1 | U1 |
| 1 | BC547 | TO-92_Inline | Q1 |
| 1 | Barrel_Jack_MountingPin | BarrelJack_Horizontal | J1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | J2 |
| 1 | Conn_01x04 | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | FINDER-40.11 | Relay_SPDT_Finder_40.11 | K1 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | C_Polarized_US | CP_Radial_D8.0mm_P3.50mm | C1 |
| 2 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
Smart switch pcb esp32 design files
The KiCad project lives in the 4mrit/smart-switch-pcb-esp32 repository on GitHub; these links point at the commit this page was built from.
- Layoutsmart-bell-pcb-esp32.kicad_pcb
- Schematicsmart-bell-pcb-esp32.kicad_sch
Smart switch pcb esp32: common questions
What microcontroller does the Smart switch pcb esp32 use?
The Smart switch pcb esp32 is built around the ESP32_DEVKIT_V1, from the ESP32 family.
How big is the Smart switch pcb esp32?
The Smart switch pcb esp32 measures 44.8 × 48 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Smart switch pcb esp32?
10 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Smart switch pcb esp32 design files?
From the 4mrit/smart-switch-pcb-esp32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Smart switch pcb esp32 design in my own project?
The repository has no license, so all rights stay with 4mrit. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Smart switch pcb esp32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k