HardLabs

Panel

4project-co-il·PlugAndPlay-SAMD21

Panel PCB layout, top view — open source Microchip SAM board by 4project-co-il

About the Panel PCB

Panel is an open source Microchip SAM PCB design by 4project-co-il, published on GitHub under the MIT license. It is a 2-layer board measuring 101.4 × 69.4 mm, with 60 components from 26 distinct parts.

Its main chip is the C78624, from the Microchip SAM family. Other key parts include the C295762 and C114502. By type, the board carries 21 capacitors, 17 connectors, 11 resistors, 4 diodes, 3 ICs and 1 transistor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Plug-n-Play SAMD21 Development Board

The PlugAndPlay system is an arduino-based environment that allows easier connections between the parts and intended to create a more "product-like" projects with permanent connections, compared to a breadboard.

PlugAndPlay parts do not require any soldering to connect. Just plug the cable to the connectors and you are ready to go. In the worst case, you might need to tighten few screws on a terminal block.

Main components on the Panel

C295762C114502C78624

Panel bill of materials (BOM)

60 components, 26 distinct parts.

QtyPartRefs
1
C295762
PCA9548A
U1
1
C114502
M24C02-FMN
U2
1
C78624
ATSAMD21G18A-A
U3
1
C916396
2N7002
Q1
1
C620155
32.768KHz
Y1
1
C2988369
USB_C_Receptacle_USB2.0_16P
J2
1
C20071191
PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left
J3
2
RealRun
Conn_01x05
J4, J6
2
RealRun
Conn_01x05
J5, J20
1
C7430446
JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal
J7
9
C7430448
JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal
J8, J9, J10, J11, J12, J13, J14, J15 +1
1
C695629
Status LED
J17
1
C89654
2.2A
F1
1
C318884
RESET
SW1
1
C965807
BLUE
D2
1
C965804
GREEN
D3
1
C965802
YELLOW
D4
1
C2480
SS14
D5
7
C14663
0.1uF
C1, C2, C14, C15, C16, C17, C18
11
C1592
1uF
C3, C4, C5, C6, C7, C8, C9, C10 +3
Show 6 more
QtyPartRefs
1
C3349
47uF/50V
C11
2
C105621
20pF
C12, C13
2
C23162
4.7K
R1, R2
3
C25804
10K
R3, R20, R21
4
C23138
330
R22, R23, R24, R25
2
C23186
5.1K
R26, R27

Panel design files

The KiCad project lives in the 4project-co-il/PlugAndPlay-SAMD21 repository on GitHub; these links point at the commit this page was built from.

Panel: common questions

What microcontroller does the Panel use?

The Panel is built around the C78624, from the Microchip SAM family.

How big is the Panel PCB?

The Panel measures 101.4 × 69.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Panel?

60 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Panel design files?

From the 4project-co-il/PlugAndPlay-SAMD21 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Panel design in my own project?

Yes, under the terms of its MIT license, which 4project-co-il chose for the repository.

Can I test firmware for the Panel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

More boards in PlugAndPlay-SAMD21

Similar boards