Hack-Club-Half-Life-Displays-Project
528390·Hack-Club-Half-Life-Displays-Project
About the Hack-Club-Half-Life-Displays-Project PCB
Hack-Club-Half-Life-Displays-Project is an open source RP2040/RP2350 PCB design by 528390, published on GitHub. It is a 2-layer board measuring 87 × 50 mm, with 11 components from 7 distinct parts.
Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 5 resistors, 3 diodes, 1 IC and 1 switch.
It belongs with the displays & leds designs in this gallery.
From the project
What is this project? This project is a custom-designed printed circuit board (PCB) that provides lighting for a glass collection cabinet. It combines white LEDs and RGB lighting to illuminate the collection while allowing different lighting modes.
What is this project? This project is a custom-designed printed circuit board (PCB) that provides lighting for a glass collection cabinet. It combines white LEDs and RGB lighting to illuminate the collection while allowing different lighting modes.
How does this project work? The lighting system uses a XIAO RP2040 microcontroller to control two 5mm white LEDs and a 5mm RGB LED. A push button allows the user to switch between lighting modes, and a 10kΩ potentiometer is included for brightness adjustment. The schematic and PCB layout were designed in KiCad, and the firmware will be written…
Main components on the Hack-Club-Half-Life-Displays-Project
Hack-Club-Half-Life-Displays-Project bill of materials (BOM)
11 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-DIP | XIAO-RP2040-DIP | U1 |
| 1 | 10k | Potentiometer_Alps_RK09K_Single_Vertical | RV1 |
| 1 | SW_Push | SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | LED_RKGB | LED_D5.0mm-4_RGB | D1 |
| 2 | LED | LED_D5.0mm | D2, D3 |
| 1 | 270R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 4 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5 |
Hack-Club-Half-Life-Displays-Project design files
The KiCad project lives in the 528390/Hack-Club-Half-Life-Displays-Project repository on GitHub; these links point at the commit this page was built from.
- LayoutCabinet Lighting.kicad_pcb
- SchematicCabinet Lighting.kicad_sch
- BOMBOM.csv
Hack-Club-Half-Life-Displays-Project: common questions
What microcontroller does the Hack-Club-Half-Life-Displays-Project use?
The Hack-Club-Half-Life-Displays-Project is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.
How big is the Hack-Club-Half-Life-Displays-Project PCB?
The Hack-Club-Half-Life-Displays-Project measures 87 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hack-Club-Half-Life-Displays-Project?
11 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hack-Club-Half-Life-Displays-Project design files?
From the 528390/Hack-Club-Half-Life-Displays-Project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hack-Club-Half-Life-Displays-Project design in my own project?
The repository has no license, so all rights stay with 528390. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hack-Club-Half-Life-Displays-Project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k