Hack-Club-Half-Life-Midi-Keyboard-Project
528390·Hack-Club-Half-Life-Midi-Keyboard-Project
About the Hack-Club-Half-Life-Midi-Keyboard-Project PCB
Hack-Club-Half-Life-Midi-Keyboard-Project is an open source ESP32 PCB design by 528390, published on GitHub. It is a board, with 8 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-S3, from the ESP32 family. By type, the board carries 3 switches, 2 diodes, 1 IC and 1 connector.
It belongs with the keyboards and audio designs in this gallery.
From the project
What is this project? This project is a custom MIDI keypad designed using KiCad. It is designed to be a compact MIDI controller with multiple inputs for controlling music software and MIDI parameters.
What is this project? This project is a custom MIDI keypad designed using KiCad. It is designed to be a compact MIDI controller with multiple inputs for controlling music software and MIDI parameters.
How does this project work? The keypad uses a Seeed Studio XIAO ESP32-S3 microcontroller to control its components. Five capacitive touch keys provide inputs, while a rotary encoder, slider potentiometer, and two buttons allow for additional controls. Two RGB LEDs provide visual feedback. The controller will be programmed to respond to these inputs and send MIDI controls.
Main components on the Hack-Club-Half-Life-Midi-Keyboard-Project
Hack-Club-Half-Life-Midi-Keyboard-Project bill of materials (BOM)
8 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-S3 | XIAO ESP32-S3 | U2 |
| 1 | Conn_01x05_Pin | Capacitative Keys | J2 |
| 1 | R_Potentiometer_MountingPin | Potentiometer_Bourns_PTA1543_Single_Slide | RV1 |
| 2 | SW_Push | Kailh Choc Low-Profile Switches | SW1, SW2 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW5 |
| 2 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2 |
Hack-Club-Half-Life-Midi-Keyboard-Project design files
The KiCad project lives in the 528390/Hack-Club-Half-Life-Midi-Keyboard-Project repository on GitHub; these links point at the commit this page was built from.
- SchematicMIDI Keyboard.kicad_sch
- BOMBOM.csv
Hack-Club-Half-Life-Midi-Keyboard-Project: common questions
What microcontroller does the Hack-Club-Half-Life-Midi-Keyboard-Project use?
The Hack-Club-Half-Life-Midi-Keyboard-Project is built around the XIAO-ESP32-S3, from the ESP32 family.
How many components are on the Hack-Club-Half-Life-Midi-Keyboard-Project?
8 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hack-Club-Half-Life-Midi-Keyboard-Project design files?
From the 528390/Hack-Club-Half-Life-Midi-Keyboard-Project repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Hack-Club-Half-Life-Midi-Keyboard-Project design in my own project?
The repository has no license, so all rights stay with 528390. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hack-Club-Half-Life-Midi-Keyboard-Project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k