TFT-Console

5drausha·TFT-Console

TFT-Console PCB layout, top view — open source RP2040/RP2350 board by 5drausha

About the TFT-Console PCB

TFT-Console is an open source RP2040/RP2350 PCB design by 5drausha, published on GitHub. It is a 2-layer board measuring 98 × 95 mm, with 8 components from 3 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 6 switches, 1 module and 1 connector.

It belongs with the displays & leds designs in this gallery.

From the project

A small console with 6 buttons and a 2.8" touch screen, powered with a raspberry pi pico.

This is my project for the Displays week. It is a small game console, with 6 Cherry MX switches as controls, a Raspberry Pi Pico to control the display, and a 2.8 inch TFT touch screen. I wanted this to be more than just a game console. It's going to have a few apps like drawing, games, and other utilities like a stopwatch or a clock. Unfortunately, I wasn't able to find a 3D model for the screen, which is why I only have a render of the PCB.

TFT-Console, from the project README
From the project README

Main components on the TFT-Console

TFT-Console bill of materials (BOM)

8 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
2.8" TFT
J1
6
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6

TFT-Console design files

The KiCad project lives in the 5drausha/TFT-Console repository on GitHub; these links point at the commit this page was built from.

TFT-Console: common questions

What microcontroller does the TFT-Console use?

The TFT-Console is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the TFT-Console PCB?

The TFT-Console measures 98 × 95 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TFT-Console?

8 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TFT-Console design files?

From the 5drausha/TFT-Console repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TFT-Console design in my own project?

The repository has no license, so all rights stay with 5drausha. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TFT-Console without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards