Etapa2 amplificador esp32
a-bobadilla·sensor-campo-electrico·etapa2_amplificador_esp32/etapa2_amplificador_esp32.kicad_pcb
About the Etapa2 amplificador esp32 PCB
Etapa2 amplificador esp32 is an open source ESP32 PCB design by a-bobadilla, published on GitHub. It is a 2-layer board measuring 55 × 42 mm, with 27 components from 20 distinct parts.
Its main chip is the PM254V-11-08-H85, from the ESP32 family. Other key parts include the TL082CP and L7805CV. By type, the board carries 10 resistors, 8 capacitors, 4 connectors, 2 ICs, 1 transistor and 1 buzzer.
It belongs with the sensors designs in this gallery.
From the project
Project: Industrial Safety Helmet with Acoustic and Web Proximity Warning for Medium-Voltage Distribution Networks (23 kV phase-to-phase / 13.2 kV phase-to-ground). Conceptual Author: Nair Yamilen Pereira — Universidad del Norte (Final Degree Project — TFG 2026). Developer: Ariel
Project: Industrial Safety Helmet with Acoustic and Web Proximity Warning for Medium-Voltage Distribution Networks (23 kV phase-to-phase / 13.2 kV phase-to-ground). Conceptual Author: Nair Yamilen Pereira — Universidad del Norte (Final Degree Project — TFG 2026). Developer: Ariel Bobadilla — Universidad Nacional de Asunción. Technical Knowledge Base: Consolidated Document (docs/BasedeConocimientosSensorCampoElectrico.md`).

Main components on the Etapa2 amplificador esp32
Etapa2 amplificador esp32 bill of materials (BOM)
27 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL082CP TI | DIP-8_W7.62mm_LongPads | U1 |
| 1 | L7805CV L7805 ST | TO-220-3_Vertical | U2 |
| 1 | S8050 TO-92_Inline JSCJ | TO-92_Inline | Q1 |
| 1 | C131339 CON_SENSOR_3x1 JST | CONN-TH_B3B-PH-K-S_EasyEDA_C131339 | J1 |
| 1 | KF350-3.5-2P TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal Cixi Kefa Elec | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J2 |
| 1 | PM254V-11-08-H85 ESP32_C3_MINI_IZQ XFCN | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | PM254V-11-08-H85 ESP32_C3_MINI_DER XFCN | PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | C3812098 SEA-1295Y-0520-42Ω CUI | MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | D_DO-35_SOD27_P7.62mm_Horizontal | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 3 | CT4-0805B104K500F3 100nF FH | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3 |
| 1 | 178MU0005 1uF KNSCHA | C_Disc_D5.0mm_W2.5mm_P5.00mm | C4 |
| 1 | CD1H473KC0BER1E000 47nF Dersonic | C_Disc_D5.0mm_W2.5mm_P5.00mm | C5 |
| 1 | 50YXF10MEFC5X11 10uF 25V Rubycon | CP_Radial_D5.0mm_P2.50mm | C6 |
| 2 | 25YXJ100M5X11 100uF 25V Rubycon | CP_Radial_D5.0mm_P2.50mm | C7, C8 |
| 3 | MFR0W4F1003A50 100k 1% UNI-ROYAL | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R4 |
| 3 | MFR0W4F1002A50 10k 1% UNI-ROYAL | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R6, R8 |
| 1 | MFR0W4F2202A50 22k 1% UNI-ROYAL | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | MFR0W4F1001A50 220R 1% UNI-ROYAL | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | MFR0W4F1002A50 R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal UNI-ROYAL | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | MFR-25FTE52-33R R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal YAGEO | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
Etapa2 amplificador esp32 design files
The KiCad project lives in the a-bobadilla/sensor-campo-electrico repository on GitHub; these links point at the commit this page was built from.
Etapa2 amplificador esp32: common questions
What microcontroller does the Etapa2 amplificador esp32 use?
The Etapa2 amplificador esp32 is built around the PM254V-11-08-H85, from the ESP32 family.
How big is the Etapa2 amplificador esp32 PCB?
The Etapa2 amplificador esp32 measures 55 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Etapa2 amplificador esp32?
27 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Etapa2 amplificador esp32 design files?
From the a-bobadilla/sensor-campo-electrico repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Etapa2 amplificador esp32 design in my own project?
The repository has no license, so all rights stay with a-bobadilla. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Etapa2 amplificador esp32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in sensor-campo-electrico
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k