HardLabs

FPGA Board

a-s-adam·pcb_work·FPGA_Board/FPGA_Board.kicad_pcb

This repository ships a schematic but no board layout.

About the FPGA Board

FPGA Board is an open source FPGA PCB design by a-s-adam, published on GitHub. It is a 2-layer board, with 77 components from 20 distinct parts.

Its main chip is the XC7Z010-1CLG400I, from the FPGA family. Other key parts include the LS1205EVD33, MT41K256M16TW and BD3539FVM-TR. By type, the board carries 59 capacitors, 9 resistors, 6 ICs, 1 connector, 1 diode and 1 inductor.

From the project

Repository for PCB designs

Working with JDM product development structures, it's hard to get full exposure on an entire electrical PCB design from start to finish. The goal of this repository is to display design, component selection, schematic capture, layout, ordering, and bring-up without sharing designs done during my 9-5 job.

dev_board - Working to redefine scope of this board; originally it was ATMEGA which is less common in production boards, so I'm exploring ESP32 based system to make an IoT mesh network. - [Work in Progress]

Main components on the FPGA Board

LS1205EVD33MT41K256M16TWXC7Z010-1CLG400IBD3539FVM-TR

FPGA Board bill of materials (BOM)

77 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LS1205EVD33
Littelfuse
U1
1
—
U2
2
MT41K256M16TW
U3, U4
1
XC7Z010-1CLG400I
XC7Z010-2CLG400I
Xilinx
U5
1
BD3539FVM-TR
ROHM Semiconductor
U6
1
USB_C_Receptacle_USB2.0_14P
J1
1
PMEG1030EJ
D1
1
BLM15PX121SN1D
120R
Murata
FB1
4
22u
C1, C2, C13, C16
2
100n
C3, C4
11
100u
C5, C6, C8, C10, C30, C34, C39, C45 +3
17
4u7
C7, C12, C14, C15, C17, C22, C23, C24 +9
24
470n
C11, C19, C20, C21, C25, C26, C27, C28 +16
1
1n
C18
1
RC1206FR-071ML
1M
YAGEO
R1
2
5.1k
R2, R3
2
12k
R4, R8
1
4k7
R5
2
100k
R6, R7
1
1k
R9

FPGA Board design files

The KiCad project lives in the a-s-adam/pcb_work repository on GitHub; these links point at the commit this page was built from.

FPGA Board: common questions

What microcontroller does the FPGA Board use?

The FPGA Board is built around the XC7Z010-1CLG400I, from the FPGA family.

How big is the FPGA Board?

The FPGA Board has 2 copper layers and is 1.6 mm thick.

How many components are on the FPGA Board?

77 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the FPGA Board design files?

From the a-s-adam/pcb_work repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the FPGA Board design in my own project?

The repository has no license, so all rights stay with a-s-adam. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FPGA Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

More boards in pcb_work

Similar boards