3 open source boards using the LS1205EVD33
Real designs built with the LS1205EVD33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
MA-XILINX-FPGA-10-LAYER
moafkaljabi
84.2 × 53.6 mm425 parts10LNo license1FPGA
Zebra-X
Dylanfg123
90 × 60 mm423 parts10LNo license0- schematic only · 77 partsFPGA
FPGA Board
a-s-adam
77 parts2LNo license0
The LS1205EVD33 in open source designs
The gallery holds 3 open source boards using the LS1205EVD33 from 3 GitHub repositories; a typical one measures about 87.1 × 56.8 mm and carries around 423 components.
67% use four copper layers or more, and 0% carry an open source license.
The most starred is MA-XILINX-FPGA-10-LAYER by moafkaljabi.
Parts used alongside the LS1205EVD33
Microcontrollers on boards using the LS1205EVD33
What boards using the LS1205EVD33 are built for
LS1205EVD33: common questions
Where can I find a LS1205EVD33 reference design?
Each of the 3 boards on this page is a real design using the LS1205EVD33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LS1205EVD33?
The BD3539FVM-TR, RTL8211F-CG, SY8003ADFC and W25Q128JVEIQ appear in the most repositories here.
Which microcontrollers do boards using the LS1205EVD33 use?
Most are built on FPGA (3).
How big is a typical board using the LS1205EVD33?
The median is 87.1 × 56.8 mm, and 33% are two-layer designs.
What is the most popular open source board using the LS1205EVD33?
By GitHub stars, MA-XILINX-FPGA-10-LAYER by moafkaljabi, with 1 stars.
Can I simulate one of these boards using the LS1205EVD33 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.