Laryngoscope

A-sambhav·Laryngoscope·PCB1/PCB1.kicad_pcb

Laryngoscope PCB layout, top view — open source board by A-sambhav

About the Laryngoscope PCB

Laryngoscope is an open source PCB design by A-sambhav, published on GitHub. It is a 4-layer board measuring 28 × 28 mm, with 37 components from 19 distinct parts.

Other key parts include the TP4056-42-ESOP8 and LMV339. By type, the board carries 19 resistors, 8 diodes, 5 connectors, 3 capacitors and 2 ICs.

It belongs with the power & battery designs in this gallery.

From the project

freelancing project

KiCad hardware design for a small laryngoscope accessory board. The schematic combines USB-C power entry, a single-cell Li-ion/LiPo charger, a four-channel comparator circuit, status LEDs, and board-to-board/wire connectors.

- PCB1/PCB1.kicadsch — circuit schematic. - PCB1/PCB1.kicadpcb — routed PCB layout. - PCB1/PCB1.kicadpro — KiCad project settings. - PCB1/PCB1.csv — exported bill of materials. - PCB1/PCB1.drl — exported drill data. - PCB1/production/ — fabrication outputs currently in the project. - PCB1/.STEP — 3D board exports and intermediate models.

Main components on the Laryngoscope

Laryngoscope bill of materials (BOM)

37 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TP4056-42-ESOP8
U1
1
LMV339
U2
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
CONN_01X02_SOCKET
Conn_01x02_Socket
J2
2
CONN_01X02_SOCKET
Conn_01x02_Socket
J3, J5
1
CONN_01X06_SOCKET
Conn_01x06_Socket
J4
6
LED_red
D1, D3, D4, D5, D6, D8
1
LED_blue
D2
1
50V
50v
D9
2
100NF
100nf
C1, C3
1
10UF
10uf
C2
6
1k
R2, R3, R6, R7, R8, R9
2
5.1K
5.1k
R4, R5
1
20K
20k
R10
1
15K
15k
R11
5
180
R12, R13, R14, R15, R17
1
4.7K
4.7k
R16
2
22
R18, R19
1
1.5K
1.5k
R20

Laryngoscope design files

The KiCad project lives in the A-sambhav/Laryngoscope repository on GitHub; these links point at the commit this page was built from.

Laryngoscope: common questions

How big is the Laryngoscope PCB?

The Laryngoscope measures 28 × 28 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Laryngoscope?

37 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Laryngoscope design files?

From the A-sambhav/Laryngoscope repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Laryngoscope design in my own project?

The repository has no license, so all rights stay with A-sambhav. Use it as a reference, and ask the author before reusing the design.

Similar boards