Motor driver

a0405chain3x10·Motor_driver

Motor driver PCB layout, top view — open source board by a0405chain3x10

About the Motor driver PCB

Motor driver is an open source PCB design by a0405chain3x10, published on GitHub. It is a 2-layer board measuring 60.3 × 48.1 mm, with 37 components from 15 distinct parts.

Other key parts include the TC4428xOA, 74HC04 and 74HC08. By type, the board carries 12 resistors, 11 capacitors, 6 ICs, 4 transistors and 4 connectors.

It belongs with the robotics & motion designs in this gallery.

From the project

This repository contains the KiCad schematics and PCB layout files for a custom DC motor driver. Designed around a discrete MOSFET H-Bridge topology, the board incorporates dedicated gate drivers and a hardware-level logic safety interlock to prevent catastrophic shoot-through co

This repository contains the KiCad schematics and PCB layout files for a custom DC motor driver. Designed around a discrete MOSFET H-Bridge topology, the board incorporates dedicated gate drivers and a hardware-level logic safety interlock to prevent catastrophic shoot-through conditions.

2. Open motor driver.kicadpro in KiCad to explore the schematic and PCB. 3. To fabricate the board, export the Gerber files directly from the .kicadpcb layout interface. When ordering from a fabricator (e.g., JLCPCB, PCBWay), a standard 1.6mm thickness with 1oz copper is sufficient, but 2oz copper is…

Motor driver, from the project README
From the project README

Main components on the Motor driver

TC4428xOA74HC0474HC08

Motor driver bill of materials (BOM)

37 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
TC4428xOA
U1, U2
2
74HC04
U3, U4
2
74HC08
U5, U6
2
PMOS
Q1, Q3
2
NMOS
Q2, Q4
2
Screw_Terminal_01x02
J1, J4
1
Screw_Terminal_01x03
J2
1
Conn_01x02_Pin
J3
2
100nF/25V
C3, C5
3
1uF/25V
C4, C6, C8
1
220uF/25V
C7
5
100nF/10V
C9, C10, C11, C12, C13
4
10
R1, R2, R3, R4
4
10k
R5, R6, R7, R8
4
47k
R9, R10, R11, R12

Motor driver design files

The KiCad project lives in the a0405chain3x10/Motor_driver repository on GitHub; these links point at the commit this page was built from.

Motor driver: common questions

How big is the Motor driver PCB?

The Motor driver measures 60.3 × 48.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Motor driver?

37 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Motor driver design files?

From the a0405chain3x10/Motor_driver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Motor driver design in my own project?

The repository has no license, so all rights stay with a0405chain3x10. Use it as a reference, and ask the author before reusing the design.

Similar boards