155 open source boards using the 74HC04
Real designs built with the 74HC04, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
8-Bit CPU 32k
slu4coder
196.9 × 125.1 mm101 parts2LNo license184NXP
TSynth Teensy 4.1
Electrotechnique
312 × 140 mm105 parts2LNo license180Minimal-64-Home-Computer
slu4coder
306.1 × 130.2 mm127 parts2LNo license93DSP-ADAU1452
ohdsp
100 × 100 mm377 parts4LTAPR-OHL-1.068Cpu board
rjw57
99.1 × 99.1 mm68 parts2LMIT68ESP8266
Basicengine
uli
85 × 56 mm44 parts2LNo license486502 Blinkenlights Card
acwright
100 × 57.6 mm73 parts2LCERN-OHL-P-2.047Eda designs
kyllikki
237.5 × 171.5 mm148 parts2LMIT32M68kcomp1
jtsiomb
159.5 × 99.8 mm50 parts2LCC-BY-SA-4.032AVR/Arduino
Misc
slgrobotics
99.1 × 99.1 mm55 parts2LNo license30OS816
c0pperdragon
76.7 × 76.7 mm36 parts4LNo license27Mainboard
c0pperdragon
88.9 × 88.9 mm42 parts2LNo license20CoreOne xCORE200-Original
ohdsp
100 × 100 mm389 parts4LNo license19CoreOne xCORE200
ohdsp
100 × 100 mm351 parts4LTAPR-OHL-1.015STM32
Asynchronous-SPDIF-Mixer
DADDesign-Projects
100 × 84 mm136 parts2LMIT12EX-MotorShield8874
DCC-EX
65.9 × 52.9 mm75 parts4LCERN-OHL-W-2.012ZX-Interface-1-Recreated
liveboxandy
222.4 × 72.5 mm75 parts2LCC0-1.011All Spectrums
alvaroalea
213 × 130 mm186 parts2LNo license10Zf vga
tangent3D
143 × 85 mm52 parts2LMIT10STM32
Scoms tacnpr
partio-scout
99.1 × 99.1 mm279 parts4LTAPR-OHL-1.09AVR/Arduino
Z80Atmega128
46nori
170 × 130 mm105 parts4LGPL-3.09Analog-Video-Comb-Filter
goscickiw
51.5 × 104.1 mm75 parts2LCC-BY-SA-4.08AVR/Arduino
Bzzt Keyboard Controller Board
SteveCooling
166 × 70 mm71 parts2LMIT8MM58167-ISA-RTC
jensma-de
89.3 × 50 mm29 parts2LNo license8RP2040/RP2350
Z80DevBoard
gianluca-rainis
219 × 108.5 mm179 parts4LCERN-OHL-S-2.07AVR/Arduino
Thc
festlv
123.8 × 99.7 mm72 parts2LNo license7ESP32
TR-808 clone
mkomakonkon
442 × 421.7 mm1268 parts2LNo license5Raspberry Pi
Pinbot electronics
Pinbot-factory
114 × 65 mm204 parts4LCERN-OHL-S-2.05Kraft80 REV2.2
ARMCoderBR
150.6 × 171.7 mm150 parts2LGPL-2.05AVR/Arduino
Mycelium
microresearch
74.5 × 83.7 mm126 parts2LGPL-3.05Motor shield
semify-eda
65.9 × 52.9 mm80 parts4LNo license5AVR/Arduino
TCPU8-Alpha
halfburnttoast
150 × 150 mm138 partsGPL-2.04CP297s
Danjovic
155.1 × 156 mm127 parts2LGPL-3.04NXP
LFlex21
laurent-fr
180.3 × 120.7 mm77 parts2LNo license4AVR/Arduino
Led wordclock
Virtex7
80 × 50.8 mm74 partsNo license4AVR/Arduino
Rgb switcher
michaelobed
360 × 200 mm129 parts4LMIT3
How designs wire the 74HC04
Read from the KiCad layouts of 118 open source designs, one per repository: what each pin of the 74HC04 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 68 of 117 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 97% | — |
| VCCpin 14 | Connected to: 5V 91% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8-Bit CPU 32k by slu4coder, TSynth Teensy 4.1 by Electrotechnique, Ps2mkb by clydeshaffer and Minimal-64-Home-Computer by slu4coder.
The 74HC04 in open source designs
The gallery holds 155 open source boards using the 74HC04 from 125 GitHub repositories; a typical one measures about 104.7 × 99.7 mm and carries around 68 components.
75% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.
The most starred is 8-Bit CPU 32k by slu4coder.
Parts used alongside the 74HC04
Microcontrollers on boards using the 74HC04
What boards using the 74HC04 are built for
74HC04: common questions
Where can I find a 74HC04 reference design?
Each of the 155 boards on this page is a real design using the 74HC04. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC04 VCC pin?
The VCC pin has a decoupling capacitor on 68 of 117 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 118 open source designs using the 74HC04.
What parts are used alongside the 74HC04?
The 74HC74, 74HC00, 74HC08, 74HC32 and 74HC245 appear in the most repositories here.
Which microcontrollers do boards using the 74HC04 use?
Most are built on AVR/Arduino (23), STM32 (7), Raspberry Pi (5) and ESP8266 (4).
How big is a typical board using the 74HC04?
The median is 104.7 × 99.7 mm, and 75% are two-layer designs.
What is the most popular open source board using the 74HC04?
By GitHub stars, 8-Bit CPU 32k by slu4coder, with 184 stars.
Can I simulate one of these boards using the 74HC04 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.