Esp32ct
Aapjedotinfo·esp32ct·hardware/esp32ct-revc/esp32ct-revc.kicad_pcb
About the Esp32ct PCB
Esp32ct is an open source ESP32 PCB design by Aapjedotinfo, published on GitHub under the Custom license license. It is a 2-layer board measuring 115 × 103 mm, with 77 components from 40 distinct parts.
Its main chip is the BC547, from the ESP32 family. Other key parts include the MH-ET Live D1 mini ESP32, LM358 and HW-178 (CD74HC4067). By type, the board carries 26 resistors, 24 connectors, 17 jumpers, 3 ICs, 3 capacitors and 2 transistors.
It belongs with the iot & wireless designs in this gallery.
From the project
16-channel CT-clamp energy monitor with P1 in/out (ESP32, ESPHome, KiCad) and a bit of help of Claude
KiCad-project voor rev C van het CT-bord: schema, netlist en een volledig gerout bord, tot en met de Gerbers voor de printfabriek. Rev C is rev B met de waarden van alle onderdelen op de zeefdruk en een liggende F2; elektrisch en qua pinbezetting zijn ze gelijk. Basis is het huidige bord, gereconstrueerd uit de draaiende firmware en uit opgave van de eigenaar; er lag geen eerder ontwerp.
Main components on the Esp32ct
Esp32ct bill of materials (BOM)
77 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MH-ET Live D1 mini ESP32 | ESP32_mini | U1 |
| 1 | LM358 | DIP-8_W7.62mm | U2 |
| 1 | HW-178 (CD74HC4067) | HW178_socket | U3 |
| 1 | BC547 | TO-92_Inline_Wide | Q1 |
| 1 | BC547 | TO-92_Inline_Wide | Q4 |
| 1 | +5V extern | MX126_2P_5mm_krap | J1 |
| 1 | RJ12 naar slimme meter | RJ12_Amphenol_54601-x06_Horizontal | J2 |
| 2 | watermeter-sensor | MX126_2P_5mm_krap | J3, J9 |
| 2 | naar relaisbordje | MX126_2P_5mm_krap | J4, J5 |
| 1 | deurbelknop | MX126_2P_5mm_krap | J6 |
| 1 | RJ12 naar laadpaal | RJ12_Amphenol_54601-x06_Horizontal | J8 |
| 1 | CT1 | MX126_2P_5mm_krap | J11 |
| 1 | CT2 | MX126_2P_5mm_krap | J12 |
| 1 | CT3 | MX126_2P_5mm_krap | J13 |
| 1 | CT4 | MX126_2P_5mm_krap | J14 |
| 1 | CT5 | MX126_2P_5mm_krap | J15 |
| 1 | CT6 | MX126_2P_5mm_krap | J16 |
| 1 | CT7 | MX126_2P_5mm_krap | J17 |
| 1 | CT8 | MX126_2P_5mm_krap | J18 |
| 1 | CT9 | MX126_2P_5mm_krap | J19 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CT10 | MX126_2P_5mm_krap | J20 |
| 1 | CT11 | MX126_2P_5mm_krap | J21 |
| 1 | CT12 | MX126_2P_5mm_krap | J22 |
| 1 | CT13 | MX126_2P_5mm_krap | J23 |
| 1 | CT14 | MX126_2P_5mm_krap | J24 |
| 1 | CT15 | MX126_2P_5mm_krap | J25 |
| 1 | CT16 | MX126_2P_5mm_krap | J26 |
| 1 | 1A | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | F1 |
| 1 | 200MA 200mA | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | F2 |
| 1 | 5V-DOORVOER 5V-doorvoer | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 16 | burden | PinHeader_1x02_P2.54mm_Vertical | JP101, JP102, JP103, JP104, JP105, JP106, JP107, JP108 +8 |
| 1 | 100µF | CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 10µF | CP_Radial_D6.3mm_P2.50mm | C3 |
| 4 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
| 1 | 4K7 4k7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R14 |
| 3 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15, R16, R18 |
| 1 | 15K 15k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R17 |
| 16 | 33R | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R101, R102, R103, R104, R105, R106, R107, R108 +8 |
Esp32ct design files
The KiCad project lives in the Aapjedotinfo/esp32ct repository on GitHub; these links point at the commit this page was built from.
Esp32ct: common questions
What microcontroller does the Esp32ct use?
The Esp32ct is built around the BC547, from the ESP32 family.
How big is the Esp32ct PCB?
The Esp32ct measures 115 × 103 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp32ct?
77 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Esp32ct design files?
From the Aapjedotinfo/esp32ct repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Esp32ct design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Esp32ct without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k