HardLabs

PCB Heater

aati106·Part-Four-Project·Battery Board/PCB_Heater_JA/PCB_Heater.kicad_pcb

PCB Heater layout, top view — open source board by aati106
Simulate this board

About the PCB Heater

PCB Heater is an open source PCB design by aati106, published on GitHub. It is a 2-layer board measuring 85.1 × 69 mm, with 38 components from 4 distinct parts.

Other key parts include the LMT84LP. By type, the board carries 16 connectors, 16 resistors and 6 ICs.

It belongs with the power & battery and science & space designs in this gallery.

From the project

This repository compiles all design, simulation, test, and documentation files related to the development of a highly integrated avionics suite, specifically focused on the Electrical Power System (EPS) for CubeSat missions. It includes schematics, PCB designs, simulations, test

This repository compiles all design, simulation, test, and documentation files related to the development of a highly integrated avionics suite, specifically focused on the Electrical Power System (EPS) for CubeSat missions. It includes schematics, PCB designs, simulations, test data, scripts, and documentation supporting the design and validation of power distribution, storage, and regulation subsystems.

Main components on the PCB Heater

LMT84LP

PCB Heater bill of materials (BOM)

38 components, 4 distinct parts.

QtyPartRefs
6
LMT84LP
U1, U2, U3, U4, U5, U6
8
Conn_01x01_Pin
J1, J2, J3, J4, J5, J6, J7, J8
8
Custom_Battery_Pad
P1, P2, P3, P4, P5, P6, P7, P8
16
0
R1, R2, R3, R4, R5, R6, R7, R8 +8

PCB Heater design files

The KiCad project lives in the aati106/Part-Four-Project repository on GitHub; these links point at the commit this page was built from.

PCB Heater: common questions

How big is the PCB Heater?

The PCB Heater measures 85.1 × 69 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB Heater?

38 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB Heater design files?

From the aati106/Part-Four-Project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PCB Heater design in my own project?

The repository has no license, so all rights stay with aati106. Use it as a reference, and ask the author before reusing the design.

More boards in Part-Four-Project

Similar boards