ArduinoShield
About the ArduinoShield PCB
ArduinoShield is an open source ESP8266 PCB design by AAzamar, published on GitHub. It is a 2-layer board measuring 57.2 × 53.3 mm, with 38 components from 18 distinct parts.
Its main chip is the ESP-01, from the ESP8266 family. By type, the board carries 26 connectors, 2 capacitors and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Shield de programación, depurado y prototipado para ESP-01 con Arduino UNO.
ArduinoShield bill of materials (BOM)
38 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x11 | Pin_11_GND | J1, J4 |
| 11 | Conn_01x11 | Pin11 | J2, J3, J5, J6, J7, J8, J9, J10 +3 |
| 2 | Power | Socket_Strip_Arduino_1x08 | P1, P9 |
| 3 | Analog | Socket_Strip_Arduino_1x06 | P2, P10, P12 |
| 2 | Digital | Socket_Strip_Arduino_1x10 | P3, P11 |
| 1 | Digital | Socket_Strip_Arduino_1x08 | P4 |
| 4 | CONN_01X01 | Arduino_1pin | P5, P6, P7, P8 |
| 1 | 3.3V | PinHeader_1x06_P2.54mm_Vertical | P14 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | AMS1117_3.3 |
| 1 | ESP-01 | ESP01 | ESP-01 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | GND2 |
| 1 | GPIO0 | PinHeader_1x01_P2.54mm_Vertical | H2 |
| 1 | GPIO1 | PinHeader_1x01_P2.54mm_Vertical | H3 |
| 1 | GPIO2 | PinHeader_1x01_P2.54mm_Vertical | H4 |
| 1 | GPIO3 | PinHeader_1x01_P2.54mm_Vertical | H5 |
| 2 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | Rx1, Tx1 |
| 1 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | D0 |
| 2 | C | CP_Radial_D4.0mm_P2.00mm | C1, C2 |
ArduinoShield design files
The KiCad project lives in the AAzamar/ArduinoShield repository on GitHub; these links point at the commit this page was built from.
- LayoutArduino_Shield.kicad_pcb
ArduinoShield: common questions
What microcontroller does the ArduinoShield use?
The ArduinoShield is built around the ESP-01, from the ESP8266 family.
How big is the ArduinoShield PCB?
The ArduinoShield measures 57.2 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ArduinoShield?
38 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the ArduinoShield design files?
From the AAzamar/ArduinoShield repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ArduinoShield design in my own project?
The repository has no license, so all rights stay with AAzamar. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ArduinoShield without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398