Anemometer
Abdenry·sensorHubProject·CAD/kiCAD/anemometer/anemometer.kicad_pcb
About the Anemometer PCB
Anemometer is an open source PCB design by Abdenry, published on GitHub. It is a 2-layer board measuring 22 × 12 mm, with 4 components from 3 distinct parts.
By type, the board carries 1 capacitor and 1 resistor.
It belongs with the sensors and iot & wireless designs in this gallery.
From the project
IOT Sensor Hub using RF communications between sensors
A small, portable, self-sustaining weather station built to provide data to an external web interface hosted with Grafana via a Raspberry Pi Zero 2 W. This station is able to collect various metrics from on board sensors such as temperature, humidity, heat index, wind speed, and wind direction. A DHT22 sensor is used to collect relative humidity and temperature metrics with an accuracy of +-2% and +-0.5C, while metrics such as wind speed and wind direction are collected with custom built sensors. The heat index is calculated in software using the DHT-sensor-library.
Anemometer bill of materials (BOM)
4 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | SIGIN1, US1881 |
| 1 | 100NF 100nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C1 |
| 1 | 10K 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
Anemometer design files
The KiCad project lives in the Abdenry/sensorHubProject repository on GitHub; these links point at the commit this page was built from.
Anemometer: common questions
How big is the Anemometer PCB?
The Anemometer measures 22 × 12 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Anemometer?
4 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Anemometer design files?
From the Abdenry/sensorHubProject repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Anemometer design in my own project?
The repository has no license, so all rights stay with Abdenry. Use it as a reference, and ask the author before reusing the design.
More boards in sensorHubProject
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k